Monitor Audio RS W12 Mains Power Switch, IEC Mains Power Connector/ Fuse Location, Volume Control

Page 10

9.Mains Power Switch

The Mains Power Switch should be switched to the ‘Off’ position when the RS W12 will not be used for extended periods. The switch must be in the ‘On’ position for the sub-woofer to function.

10.IEC Mains Power Connector/ Fuse Location

The RS W12 is supplied with a two-pin mains input socket for connection to the mains supply. Use ONLY the appropriate IEC mains lead provided with the product. Also fitted is an external mains fuse. If a fuse blows during operation a spare fuse is provided within the fuse holder for replacement. If you wish to change the fuse, you can do this by removing the IEC mains lead and carefully levering out the original fuse from its holder below the IEC mains input socket (9a). If the fuse blows again it is advisable to seek help from an authorised service agent. DO NOT attempt to re-fit a further fuse as this could result in serious damage to the amplifier unit.

11.Volume Control

This control allows the level or volume to be adjusted in order to achieve a balanced overall sound. To use this facility you will need to play a selection of familiar music or film excerpts. Start with the volume at minimum and increase the level control until a balanced sound is established. If using an A/V processor or A/V receiver amplifier, the system can adjusted by the test tone function within the set-up features. (refer to the set up section in the A/V processor or A/V receiver amplifier user guide.) When the RS W12 is correctly set-up, you should not be able to identify its location easily in the room.

12.EQ 1 setting

The EQ 1 setting should be set as a default option. This will provide the best overall transient response and power output. This setting will provide a maximally flat response suitable for music or Music video. Note: Frequency roll off starts at 27Hz

13.EQ 2 setting

The EQ 2 setting should be used when an emphasis in the low frequency is required. An additional boost of 4dB will be provided at 21Hz to give impact essential for action movies.

The EQ1 and EQ2 settings can also be adjusted to suit personal taste. This is done by pressing the buttons located on the control panel.

10

© Monitor Audio 2005 RS W12 Rev 1

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Contents Introduction Safety Instructions Servicing Damage requiring ServiceCleaning Natural Wood VeneersRe-cycling UnpackingSpiked Foot Fixing For Carpeted Floors Spiked Foot Fixing For Wooden/Hard FloorsAmp Panel and Controls Low Pass Filter Switch Stand-by / On IndicatorType of main speaker Crossover control setting Phase Control SwitchRCA Line Level Inputs Left & Right Power Mode Switch with On-Auto-Off FacilityRCA Line Level Outputs Left & Right Volume Control Mains Power SwitchIEC Mains Power Connector/ Fuse Location EQ 1 settingPositioning/Initial Set Up Set UpSpecification Guarantee and Service Claims under this GuaranteeLVD 73/23/EEC Low Voltage Directive EC Declaration of ConformityEC Declaration of Conformity EMC 89/336/EEC Electro Magnetic CompatibilityProduct Details Data ProtectionOwner Information Dealer Details

RS W12 specifications

The Monitor Audio RS W12 is a subwoofer that embodies the pinnacle of performance in modern audio design. Known for its exceptional bass reproduction and versatility, it has become a favorite among audiophiles and home theater enthusiasts alike.

At the heart of the RS W12 is a powerful 12-inch driver, specifically designed to deliver deep and accurate low-frequency sound. The driver utilizes Monitor Audio's renowned RST (Rigid Surface Technology) which enhances stiffness while reducing distortion. This technology allows the RS W12 to produce tight, controlled bass that can shake the walls and fill large spaces without sounding boomy or overwhelming.

One of the key features of the RS W12 is its built-in 500W Class D amplifier. This amplifier not only ensures that the subwoofer runs efficiently but also provides ample power to deliver dynamic bass response. The amplifier is finely tuned to match the characteristics of the driver, leading to a harmonious blend that elevates both music and cinematic experiences.

The RS W12 is also equipped with advanced DSP (Digital Signal Processing) capabilities. This allows for precise tuning and customization of the subwoofer's performance based on the listening environment. Users can easily adjust parameters such as phase, crossover frequency, and level from the intuitive control panel, ensuring optimal integration with other speakers in the setup.

Built with high-quality materials, the RS W12 features a robust cabinet that minimizes unwanted resonance. The stylish design, characterized by a sleek, modern finish, makes it an attractive addition to any audio setup. Available in different finishes, it can seamlessly blend into various home aesthetics.

Connectivity options are versatile, with both line-level and speaker-level inputs, allowing the RS W12 to integrate with a wide range of audio systems. Whether used in a dedicated home theater or as a part of a stereo setup, its adaptability is one of its standout attributes.

In conclusion, the Monitor Audio RS W12 subwoofer stands out in the crowded market of audio equipment. With its innovative technologies, powerful amplification, and precise tuning capabilities, it delivers an unparalleled audio experience that appeals to both casual listeners and dedicated enthusiasts. Its combination of form and function makes it a compelling choice for anyone looking to enhance their sound system with potent and precise low-end performance.
Top Page Image Contents