Positioning/Initial Set Up

The RS W12 should now be sited in the most suitable position, preferably not directly in the corner of a room as this may cause excessive bass boom. Once a desirable position is achieved it is important to check if the cables are long enough to reach comfortably without being under tension. Leave the RS W12 unplugged until the installation procedure is completed. The optimal control settings will depend entirely on your system configuration. For initial trials set the controls as follows:

Volume control	Should be set to minimum
Frequency control	Should be set to the minimum position (40Hz)
Phase control	Should be set to zero degrees
Power switch	Should be set to ‘Auto’
EQ 1 setting	Should be selected
Low pass filter switch	Should be set to the ‘Out’ position

Input connections can be made at this stage before the power is connected to the RS W12. Please refer to page 7 for set up and fine-tuning.

Never connect or disconnect the RCA input lead connection with the RS W12 switched on.

Set Up

Once the input cables are connected and the controls are set in accordance with the initial set-up procedure above, the RS W12 can be connected to the mains power supply and switched on. Do not play any music at this stage. With the Power Mode Switch in the ‘Auto’ position, the unit should remain in standby until a signal is received.

Play a variety of music/ film excerpts starting at a very low volume level, increasing to an average listening level once you are sure everything is working correctly. Check the back of the RS W12, the LED indicator should now indicate it is ‘ON’. Please now follow the bulleted instructions below: -

For use with an AV amp/receiver (product with Subwoofer output) please select the low pass filter switch to the ‘Out’ position. Otherwise select low pass filter switch to the ‘On’ position, to engage the crossover frequency control, ref. Page 8.

If using the crossover frequency control please adjust in accordance with the table on page 9 further fine-tuning may be required.

Adjust the Volume Control to desired level for initial trials, ref. page 10

The Phase Control can now be set ref. Page 8

The volume control can now be set to finish the set-up procedure. It is important to try a variety of music and film excerpts with which you are familiar in order to obtain the optimum overall settings.

RS W12 specifications

The Monitor Audio RS W12 is a subwoofer that embodies the pinnacle of performance in modern audio design. Known for its exceptional bass reproduction and versatility, it has become a favorite among audiophiles and home theater enthusiasts alike.

At the heart of the RS W12 is a powerful 12-inch driver, specifically designed to deliver deep and accurate low-frequency sound. The driver utilizes Monitor Audio's renowned RST (Rigid Surface Technology) which enhances stiffness while reducing distortion. This technology allows the RS W12 to produce tight, controlled bass that can shake the walls and fill large spaces without sounding boomy or overwhelming.

One of the key features of the RS W12 is its built-in 500W Class D amplifier. This amplifier not only ensures that the subwoofer runs efficiently but also provides ample power to deliver dynamic bass response. The amplifier is finely tuned to match the characteristics of the driver, leading to a harmonious blend that elevates both music and cinematic experiences.

The RS W12 is also equipped with advanced DSP (Digital Signal Processing) capabilities. This allows for precise tuning and customization of the subwoofer's performance based on the listening environment. Users can easily adjust parameters such as phase, crossover frequency, and level from the intuitive control panel, ensuring optimal integration with other speakers in the setup.

Built with high-quality materials, the RS W12 features a robust cabinet that minimizes unwanted resonance. The stylish design, characterized by a sleek, modern finish, makes it an attractive addition to any audio setup. Available in different finishes, it can seamlessly blend into various home aesthetics.

Connectivity options are versatile, with both line-level and speaker-level inputs, allowing the RS W12 to integrate with a wide range of audio systems. Whether used in a dedicated home theater or as a part of a stereo setup, its adaptability is one of its standout attributes.

In conclusion, the Monitor Audio RS W12 subwoofer stands out in the crowded market of audio equipment. With its innovative technologies, powerful amplification, and precise tuning capabilities, it delivers an unparalleled audio experience that appeals to both casual listeners and dedicated enthusiasts. Its combination of form and function makes it a compelling choice for anyone looking to enhance their sound system with potent and precise low-end performance.