Monitor Audio Monitor Audio 2005 Rev 2 user manual Ancillary Equipment, Guarantee and Service

Page 15

Ancillary Equipment

All Monitor Audio Radius loudspeakers present an easy, efficient load and are compatible with most good quality amplifiers.

Implementation of the latest design and construction techniques offer equal suitability to the demands of both current and future digital and analogue formats. MonitorAudio’spowerhandlingfiguresarebaseduponundistortedspeechand music signals.

All Monitor Audio loudspeakers are primarily intended for use in a

normal domestic environment. Provided you do not overdrive your amplifier or make excessive use of bass or treble boosts, you should never damage either the amplifier or loudspeakers.

High quality components are utilised to produce these loudspeakers ensuring accurate reproduction of the signal fed to them, so it is important to appreciate that the ancillary equipment used will profoundly affect performance.

If distortion is evident when the volume level is increased this is a sign of overdriving and the volume level should be reduced immediately.

Used properly, loudspeakers will rarely fail and if both units reproduce the same fault or distortion, then it is likely that the problem is elsewhere in the system. In such instances please contact your dealer.

Guarantee and Service

Valid upon completion of the guarantee card and its return within 30 days of purchase.

This equipment has been fully tested prior to dispatch from the factory. Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects for the period of three years (one year for Radius 360/720) from the date of purchase (see conditions below), provided that the product was supplied by an authorised Monitor Audio retailer under the consumer sale agreement.

(Thewords‘consumersale’shalbeconstruedinaccordancewith Section 15 of the supply of goods act 1973).

Monitor Audio accepts no responsibility for defects arising from accident, misuse, abuse, wear and tear, modification or operation outside of that specified within this manual. Neither will responsibility be accepted for damage or loss occurring during transit to or from the parties claiming under this guarantee.

This guarantee covers both labour and parts. The liability of Monitor Audio is limited to the cost of repair or replacement of the defective parts (at the discretion of Monitor Audio) and under no circumstances extends to consequential losses or damage.

Service

The user should not attempt to service their Radius loudspeakers beyond that specified in this manual. Qualified service personnel should carry out all other servicing requirements.

15

© Monitor Audio 2005 Rev 2

Image 15
Contents Contents Safety InstructionsIntroduction Grille Fitment ConfigurationTechnical Specification PositioningPolymer Dome tweeter Technical Specification Radius 45/90/180 Wall Bracket 10.5 D Bass reflex Range Requirements 50 Hz 90dB 108dBA 120W 20-120 W 25 KHz Radius 225/250 Wall Bracket Fixing Instructions Configuration Unpacking & Installation Position/LocationSubwoofer Connections Radius 360/720 Features Radius Troubleshooting Fine-tuningSystem wiring configuration Guarantee and Service ServiceAncillary Equipment SS6 7XL Claims under this Guarantee