Blomberg TKF 7230 manual Appropriate installation location, Under Counter Installation

Page 7

3Installation

Appropriate installation location

Install your machine in environments which have no risk of freezing and in a stable and level position.

Do not place your machine on a long pile rug or on similar surfaces.

Operate your machine in a well ventilated, dust-free environment.

Do not block the air ducts in front of and under the machine with materials such as long pile rugs and wooden bands.

BMake sure that your machine is not placed on the power cable.

BKeep at least 1. 5 cm from the edges of other furniture.

Under Counter Installation

A special part (Part no 295 950

0100) replacing the top trim must be provided and installed by the Authorized Service in order to use the machine under a counter or in a cupboard. It should never be operated without the top trim.

Leave at least 3 cm of space between the side and rear walls of the machine and the walls of the counter/cupboard when installing your machine under a counter or in a cupboard.

Use on a washing machine

A fitting device should be used between the two machines for use on a washing machine. The fitting device

(Part no. 295 560 0100 white/ 295

560 0200 grey) must be installed by the Authorized Service.

Place the machine on a sound floor. If it is to be placed on top of a washing machine, the approximate weight together may reach 180 kg when they are full. Therefore, the floor must be capable of carrying the load on it!

Adjusting the feet

In order to ensure that your machine operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet.

Rotate the feet to adjust until the machine stands level and firmly.

CNever unscrew the adjustable feet from their housings.

Ventilation hose and connection (for products equipped with an outlet vent)

Ventilation hose assures exhausting of the air from inside the machine.

There are 3 air outlets on the rear, left and right sides of a vented dryer. The sides are covered by a replaceable plastic cover.

Stainless sheet metal or aluminum pipes can be used instead of the hose. The diameter of the pipe to be used should be minimum 10 cm.

Maximum hose and pipe lengths are given in the table below.

 

Hose

Pipe

Maximum length

8 m

10 m

 

 

 

1 elbow 45°

-1.0 m

-0.3 m

 

 

 

1 elbow 90°

-1.8 m

-0.6 m

 

 

 

1 elbow 90° short

 

-2.7 m

 

 

 

1 wall passage

-2.0 m

-2.0 m

 

 

 

CEach elbow and other passages should be subtracted from the above maximum length.

To connect a ventilation hose;

1.Fit the hose adaptor (90° or flat adaptor) by pressing it on the air outlet at the rear of your machine. Close the remaining 2 air outlets with plastic covers.

2.Connect the air outlet hose to the hose spacer piece (90° or flat adaptor) by turning it anti-clockwise.

3.Make the hose passages as shown below.

6 - EN

Image 7
Contents TKF Please read this manual first Explanation of symbolsImportant information or useful hints about usage Table of Contents Overview Your DryerTechnical Specifications Intended use General SafetySafety instructions First UseAdjusting the feet InstallationAppropriate installation location Under Counter InstallationElectrical connection Disposing of the old machine Destroying the packaging materialCorrect load capacity Initial preparations for dryingGarments suitable for drying in the machine Preparing clothes to be driedLoading door Following weights are given as examplesProgram selection Selecting a Program and Operating Your MachineControl panel Turning the machine onSynthetics Timer programsMain programs CottonsProgram selection and consumption table Auxiliary function Time delayStarting the Program Changing the program after the program has started Progress of programChild-proof lock End of program Ending the program through cancelingFor the condenser products equipped with a condenser Maintenance and cleaningCover filter Filter drawer for products equipped with a heat pumpCondenser sponge for products equipped with a heat pump You must be careful not the lose these spare parts Sensor and drum finSlide in the water tank until it stops Problem Cause Explanation / Suggestion Solution suggestions for problemsCall an authorized service if the problem persists Page Bitte lesen Sie dieses Dokument zuerst SymboleDiese Bedienungsanleitung Überblick Technische Daten InhaltFilterschublade hinter der Frontblende 9 Netzkabel Ihr TrocknerÜberblick AbbildungTechnische Daten Bestimmungsgemäßer Gebrauch WarnhinweiseAllgemeine Sicherheit Erste InbetriebnahmeWenn Kinder im Haus sind Füße einstellen UntertischinstallationDer richtige Aufstellungsort Aufstellung auf einer WaschmaschineSchaden nehmen Rückseite der Maschine schiebenAnschluss der Maschine an Elektrischer Anschluss VerpackungsmaterialEntsorgen AltgeräteentsorgungDie richtige Wäschemenge Vorbereitungen vor dem TrocknenTrockner-geeignete Textilien Textilien zum Trocknen vorbereitenEmpfindlich TürProgrammauswahl Programm auswählen und mit der Maschine arbeitenBedienfeld Maschine einschaltenSynthetikfasern TimerprogrammeHauptprogramme BaumwolleEnergie-Standardprogramm EN Programmauswahl- und VerbrauchstabelleHinweisanzeigen ZusatzfunktionenZeitverzögerung Programmfortschritt Programm startenProgramm nach Programmstart ändern Waschprogramm abbrechen KindersicherungProgrammende Filterschublade bei Produkten mit Wärmepumpe Wartung und ReinigungDeckelfilter Kondensator bei Produkten mit KondensatorKondensatorschwamm bei Produkten mit Wärmepumpe Maschine führen Mit Ihrer Maschine werden ein Ersatz Sensor und TrommelflügelWassertank bei Produkten mit Kondensator und Wärmepumpe Kunststoffrahmen WichtigPage Lösungsvorschläge bei Problemen

TKF 7230 specifications

The Blomberg TKF 7230 is a cutting-edge tumble dryer, designed for efficiency and convenience, making it a popular choice among modern families. This model exemplifies the brand's commitment to quality and innovation, ensuring that laundry care is both effective and environmentally friendly.

One of the standout features of the Blomberg TKF 7230 is its impressive capacity. With a drum size of 7 kg, it is ideal for medium-sized households, allowing users to dry a substantial amount of laundry in a single cycle. This appliance has been engineered with thoughtful designs that maximize space and minimize energy use.

This tumble dryer employs advanced heat pump technology, which not only assists in reducing energy consumption but also helps to protect clothes from damage during the drying process. The heat pump system works by recycling hot air through the drum, ensuring that clothes are dried at lower temperatures. This not only saves energy but also preserves the quality of fabrics, ensuring longevity and reducing the risk of shrinkage.

The TKF 7230 boasts a selection of drying programs tailored to various fabric types and user needs. Whether you need to quickly dry sportswear, or delicately handle wool or silk, this dryer has the right setting. The automatic sensor drying feature is particularly impressive, preventing overdrying and optimizing energy usage by detecting when clothes are adequately dried.

Another notable characteristic of the Blomberg TKF 7230 is its quiet operation. With a low noise level during the drying cycles, it is suitable for placement in laundry rooms or near living spaces without causing disruption.

In terms of design, the TKF 7230 features a sleek and modern appearance, fitting seamlessly into contemporary interiors. Its user-friendly control panel includes a clear display, making it simple to choose programs and monitor progress.

Safety is also a priority in this model, equipped with a child lock function, which prevents settings from being changed accidentally, and a lint filter that is easy to clean and maintain.

Overall, the Blomberg TKF 7230 combines efficiency, convenience, and thoughtful design to provide an excellent solution for tackling laundry. With its array of features, this tumble dryer stands out in the market, catering to the needs of today’s environmentally conscious consumers.