PANEL DESCRIPTION
1. Front Panel
1.POWER SWITCH: The power switch turns the unit ON and OFF. The LED illuminates red when the switch- er is powerd ON
2.INPUT LED DISPLAY: Input channel readout matches numbered outputs marked directly below.
3.INPUT SELECT BUTTONS:Input selection buttons are provided for each output.
4.SET BUTTONS: Sets selected source.
5.IR SENSOR: The IR sensor recieves IR commands from the remote control.
6.19 INCH RACK MOUNT BRACKETS: 19 inch 2U
2. Rear Panel
1.DC POWER INPUT.
Power Jack:
DC Jack - inner OD O 2.1mm (+ )
Outside OD O 5.5mm (GND)
Power input - 12V DC, 3A
Toll free: | 4 | www.atlona.com |
Local: |