Axis Communications 140 BJC Quick Installation Guide, Physical Description, Hardware Installation

Page 2

Quick Installation Guide

This guide covers the installation and basic setup procedures for the AXIS PrintPoint 140 BJC. If you need more detailed instructions, please refer to the AXIS PrintPoint 140 BJC User’s Manual.

Physical Description

LPT1 Printer

Connector

Ethernet 10baseT Connector

External Power Supply Connector

Test Button

Network Indicator Power Indicator

Installing AXIS PrintPoint 140 BJC

You should proceed with the following instructions, as appropriate for your type of network. Refer to all relevant sections if you intend to use the AXIS PrintPoint 140 BJC in a multiprotocol environment.

Hardware Installation

1.Note the serial number found on the underside label of the AXIS PrintPoint 140 BJC. You need this number during the configuration.

2.Switch off the printer and plug the AXIS PrintPoint 140 BJC into the printer’s parallel port.

3.Connect the AXIS PrintPoint 140 BJC to the network using an appropriate Ethernet cable.

4.Switch on the printer and connect the external power supply to the AXIS PrintPoint 140 BJC. Ensure that the Network Indicator is flashing.

5.Successful output of a Test Page will effectively confirm that the unit has been connected correctly. Press the Test Button to print a Test Page.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Page Hardware Installation Quick Installation GuideInstalling Axis PrintPoint 140 BJC Physical DescriptionNetWare To set up print queuesTo set up the advanced operating parameters Peer-to-peer printing WindowsWindows 95 and NT Windows 3.1 and Windows for Workgroups Client-server printingCreate a Print Queue OS/2 version Windows Clients using LANtasticOS/2 Print queue sharing Web Based managementCreate a Print Queue OS/2 version 2.x and OS/2 Warp Paris Axis Communications LundBoston London
Top Page Image Contents