English
Getting Started
Getting Started
Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws.
1 | Attach your LED TV to the stand. |
| |
| ■ Two or more people should carry the TV. |
| |
| ■ Make sure to distinguish between the front and back of the stand when assembling |
| |
|
| them. |
|
| ■ To make sure the TV is installed on the stand at a proper level, do not apply excess |
| |
|
| downward pressure to the upper left of right sides of the TV. |
|
|
|
| Front |
2 | Fasten screws at position 1 and then fasten screws at position 2. |
| |
■ | Stand the product up and fasten the screws. If you fasten the screws with the LED | 2 | |
| TV placed down, it may lean to one side. |
|
■ The stand is installed for models with the screen size of 37 inch and above.
1
Back
Disconnecting the Stand
1
2
3
Remove screws from the back of the TV.
Separate the stand from the TV.
■Two or more people should carry the TV. Cover the bottom hole with the cover.
1 | 2 | 3 |