S P E A K E R S E L E C T I O N S Y S T E M
Operation
There are two ways to use the
If you intend to play more than one pair of speakers at the same time, you will need to become familiar with the opera- tion of the
Receiver
TUNER 94.9 | Figure 2 |
15 | Wiring Diagram |
|
|
| Niles |
|
|
Niles Audio Corporation Miami, Florida USA |
|
|
| |
AMPLIFIER | SPEAKER 4 | SPEAKER 3 | SPEAKER 2 | SPEAKER 1 |
| Speaker | Speaker | Speaker | Speaker |
9 | Pair 4 | Pair 3 | Pair 2 | Pair 1 |
S P E A K E R S E L E C T I O N S Y S T E M
Installation
1.Select a convenient mounting location for the
2.Run all the necessary wiring to the
3.Locate the connector plugs (and remove them if they are plugged in). See (Figure 2).
4.Strip 1/4" of insulation from the end of each wire. Tightly twist the end of each wire until no frayed ends remain.
5.Use a small flathead screwdriver or your thumbnail to raise the locking tabs, exposing the holes on the removable con- nector plug.
6.Insert each wire into the appropriate hole on the removable connector plug, and snap the locking tab down.
NOTE: To help you avoid improper installation, the connector plug is keyed.
7.Insert the smooth side of the connector plug into the smooth side of the socket. Don’t force the scalloped side of the connector plug into the smooth side of the socket. See (Figure 3).
The inputs of the
8.Locate the
6