Chapter 2 Installing CNS NetFlow Collection Engine
Installing on a Solaris or
Installing on a Solaris or HP-UX Platform
The procedure for installing CNS NetFlow Collection Engine on Solaris and
If you are installing CNS NetFlow Collection Engine for the first time, the installation is basically the same, but with fewer prompts from the installation script.
Note During an upgrade installation, existing configuration files and log files are detected and moved to the directories NFC_DIR/config/old and NFC_DIR/logs/old, respectively.
To install the CNS NetFlow Collection Engine, perform the following steps:
Step 1 Log into the host as root.
Step 2 Perform one of the following:
a.When installing from
b.When downloading the image over the web:
–Download the zipped distribution file to a directory with at least 200 MB of available space.
–Unzip and untar the distribution with gzcat and tar:
gzcat
The following files are created:
NFC_setup.sh – Install script
CSCOnfc-<platform>-<version>-<build>.<type> – Install image. For example
CSCOnfc-solaris- 5.0-2.standard
–Run the install script specifying the install image as the argument, for example:
./NFC_setup.sh
Note On Solaris, the install image
Note Software can only be installed in the directory /opt/CSCOnfc. If some other directory is desired, create a symbolic link to /opt/CSCOnfc before installing the software.
Cisco CNS NetFlow Collection Engine Installation and Configuration Guide, 5.0.2
|
| ||
|
|
