HP S7300CL manual Removing or installing an expansion card, Replacing or adding a memory module

replacing or adding a memory module

Upgrade the memory in your PC with memory of the same type and speed as the memory originally installed in your PC.

CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage

the module.

1Open both latches of the memory module socket (1).

opening the latches on the memory module socket

•If you are replacing a memory module, put the new memory module in the same memory slot from which the old memory was removed.

•If you are adding a memory module, install the new module into the socket nearest the preinstalled module, and install additional modules in the next available sockets.

2The memory module can be installed in only one way. Match the notch on the module (1) with the tab on the memory socket. Push the module carefully and firmly into the slot, ensuring that the latches (2) on both ends snap into place.

installing a memory module

3Complete the procedure described in “reassembling the pc” on page 10.

NOTE: If a blank screen is displayed after replacing or adding a memory module, the memory is installed incorrectly or it is the wrong type of memory. Remove and reinstall the memory module.

removing or installing an expansion card

An expansion card is a circuit board that fits into a PC expansion slot. Your PC contains several expansion slots that can be used to add components to your PC. Component configurations vary by model.

Expansion cards you can replace or add to your PC include:

•Modem

•Network Interface Card (NIC)

•Graphics Card

•Sound Card

•FireWireTM (IEEE 1394) Auxiliary Card

A Phillips screwdriver is needed to remove, replace, or add an expansion card.

8Upgrading and Servicing Guide