2Press inward on each side of the bracket brace (3), and lower the bracket until it snaps into place over the diskette drive. Ensure that the guide screws (4) are installed in the adapter.

3Return to “replacing or adding a drive” on page 5, and begin with step 1.

3

 

2

2

1

 

4

2

replacing the diskette drive adapter on the 8000 series

upgrading or replacing memory

Your PC comes with random access memory (RAM), which temporarily stores data and instructions on your PC. You can install memory expansion modules in the memory expansion slots in the PC. The procedures for upgrading or replacing these modules are the same for the S0000 and 8000 series.

removing a memory module

CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.

1Complete the procedure described in “preparing the pc” on page 1, but do not remove the front bezel.

2Locate the memory module inside your PC. See the following illustration for the location of the memory modules (1), memory slots (2), and release latches

(3) on the system board.

locating the memory module

NOTE: The location and number of memory modules may vary slightly by model.

3Open both latches of the memory module socket

(1) found at each end of the memory module. Lift the memory module (2) from the memory slot.

removing a memory module

Upgrading and Servicing Guide 7

Page 11
Image 11
HP S7300CL manual Upgrading or replacing memory, Removing a memory module

S7300CL specifications

The HP S7300CL is a standout model in the realm of storage solutions, particularly designed for high-performance and expansive data environments. This solid-state drive (SSD) is tailored to meet the demands of enterprise-level applications, providing an exceptional blend of speed, reliability, and capacity.

One of the hallmark features of the HP S7300CL is its remarkable read and write speeds, which significantly enhance data transfer rates. With a read speed that can reach up to 3,500 MB/s and a write speed of around 3,000 MB/s, this SSD allows for seamless handling of large files and applications. This level of performance is particularly beneficial for data-intensive tasks such as video editing, 3D rendering, and complex database operations.

The S7300CL employs the NVMe (Non-Volatile Memory Express) protocol, which optimizes the drive's performance by utilizing the PCIe (Peripheral Component Interconnect Express) interface. This combination ensures lower latency and higher throughput compared to traditional SATA drives, making it an ideal choice for modern computing needs. The advanced controller technology further enhances performance, allowing for efficient data management and improved endurance.

In terms of capacity, the HP S7300CL offers a range of options, typically available in sizes from 256GB to 2TB. This versatility enables businesses to select a suitable configuration based on their storage requirements without compromising on performance. The drive is also built with robust endurance, boasting high TBW (terabytes written) ratings, which are essential for enterprise environments where data is frequently read and written.

The HP S7300CL also incorporates advanced security features, including AES 256-bit hardware encryption. This ensures that sensitive data remains secure from unauthorized access, complying with industry standards for data protection. Furthermore, the drive supports TRIM and S.M.A.R.T technology, which contributes to the longevity and health of the SSD by optimizing performance and managing available storage space efficiently.

In conclusion, the HP S7300CL SSD is an exceptional choice for organizations seeking high-speed, reliable, and secure storage solutions. Its combination of NVMe technology, impressive read/write speeds, generous capacities, and strong security features make it a compelling option for enterprise data management and demanding applications. With the ability to handle intensive workloads seamlessly, the S7300CL stands out as a leading choice for modern storage needs.