Siemens se5880 manual Hardware Specifications

Page 8

SIEMENS se5880 Ethernet Security Router

Chapter 1 Product Specifications

User’s Guide

Hardware Specifications

 

 

Hardware Specifications

Physical Specifications

Unit Dimensions:

8.4W x 7D x 1.7H inches

21.3W x 17.8D x 4.3H cm

Weight:

1.5 lbs.

.68 Kg.

Power Requirements

AC Voltage:100 to 120V AC or 220 to 240V AC

Frequency:50/60 Hz

Consumption:10W maximum

Built-in power supply with on/off switch

Ethernet Interfaces

Trusted Ethernet Interface - Four port, full- duplex 10/100-BaseT Ethernet switch (8-pin, RJ-45)

Untrusted (WAN) Ethernet Interface - Single full-duplex 10/100-BaseT, switched Ethernet port (8-pin, RJ-45)

Green/Amber LEDs

Operational Environment

Temperature:

40°F to 105°F

5°C to 40°C

Humidity: 20% to 80% non-condensing

Processor

Motorola® 64 MHz MPC857DSL

8 MB DRAM, 4 MB Flash Memory

3DES, DES, MD5, SHA hardware assist

Serial Interface

One RS-232 asynchronous console or modem port (RJ-45)

SIEMENS

2

Image 8
Contents Se5880 Software License and Limited Warranty Software LicenseGeneral Provisions Table of Contents Security Setup User SetupAdvanced Setup Monitoring Router Front Panel Back PanelHardware Specifications Software Specifications Security Installation Requirements Package ContentsNetwork Service Provider Requirements PC RequirementsHardware Installation PC Configuration Windows 98/MEWindows NT Select TCP/IP Protocol from the Network Protocols listWindows Windows XP Mac OS Mac OSX Linux Configuring the Router Establish ConnectionRouter Information To do this Refer toAccess Easy Setup Wizard Untrusted Interface ConfigurationUsing PPPoE Not Using PPPoEUsing PPPoE Not Using PPPoEDynamic Host Configuration Protocol Trusted Interface Configuration User Setup User ManagementAdding/Modifying a User Account Deleting a User Account User Lookup LocalRadius NoneUntrusted Secure Mode ConfigurationTrusted Configure the Radius Server Configure the TacPlus Server Management Classes Class Functional AreasChange Password Access Control No access restrictionsClick Save and Reboot Telnet WebAdvanced Setup DMZ ApplyDMZ Router Clock Dhcp QoS Configure QoS Policy Siemens Before policy Reorder QoS PoliciesTo the end Routing Table Configuration Dial Backup Click Enable Dial BackupInternal Modem External Modem Switch Management Switch Mirror Configuration Switch Age Time Command Line Interface File Editor Security Setup NAT Port Number DisableDefault Snmp Password Enter the New Password and New Password againSnmp IP Filter Click Add IP RangeSecure Shell Key GeneratorConfigure SSH Load Keys Key Generator Firewall Scripts Stateful Firewall Firewall RulesConfigure Stateful Firewall View Dropped Packets Configure Firewall Rules Protocol/Port ApplicationDelete Firewall Rules IKE/IPSec Configuration Easy IKE/IPSec Setup Advanced IKE/IPSec Setup IKE PeersIKE Peers Definition IKE Proposals Definition IKE IPSec Proposals Definition Siemens IKE IPSec Policies Definition Siemens VPN Log On Monitoring Router System SummaryEthernet Interface Information Remote Connection InformationIP Routing Information System InformationDiagnostics PPPoE SessionInterface Information ATM StatisticsRouting Table Information Files InformationList All Configuration Data Memory UsageTCP/IP Statistics