273-1825rc.fm Page 10 Tuesday, June 1, 1999 2:05 PM
•Review the power or ID plate on the AC power adapter usually used to power the device. Look for the word “OUTPUT” followed by a number and V DC. Example: OUTPUT: 18V DC.
If the power adapter or computer indicates a “voltage range,” use the voltage that is closest to the
Note: The specific notation “V DC” might not be indicated. Instead, the international sym- bol shown to the right might be used.
In rare cases when the voltage setting is between whole numbers, such as 15.5V DC, use the lower setting first (15V DC). If the device does not seem to operate prop- erly, readjust it to the higher value (16V DC).
2.Remove the protective label covering the voltage selector. Then, using the tool provided, or a small
screwdriver, turn the adjustment dial to align its arrow with the required setting on the label.
10