Mitsubishi Electronics HC910 Connecting to a video player, etc, Connecting to a DVD player, EN-13

Connecting to a video player, etc.

Video player, or the like

	2
COMPONENT VIDEO IN	To video out-
	put terminal
S-VIDEO IN	1 INTo terminalVIDEO
VIDEO IN
	Video cable
	Video player, or the like
S-video cable
	To S-video output
1To S-VIDEO	2 terminal
IN terminal

COMPONENT VIDEO IN

S- IN

VIDEO IN

1.Connect one end of the optional video cable to the VIDEO IN terminal of the projector.

2.Connect the other end of the video cable to the video output terminal of the video equipment.

When the video equipment is equipped with the S-video output terminal, make the connection as follows.

1.Connect one end of the optional S-video cable to the S-VIDEO IN terminal of the projector.

2.Connect the other end of the S-video cable to the S-video output terminal of the video equipment.

ENGLISH

•Also read the instruction manual of the equipment to be connected.

•Contact your dealer for details of connection.

When a TV tuner or VCR is connected:

When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL may appear on the screen when you change the channel via any channel that is not being received. In such a case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip function (that is a function not to display channels that are not being received) enabled.

Connecting to a DVD player

To connect this projector to video equipment that has component video output terminals, such as a DVD player, use the COMPONENT terminals.

Component cable (Option)	PB/CB
Y	PR/CR

COMPONENT VIDEO IN

S-VIDEO IN

VIDEO IN

PR/CR PB/CB Y

DVD player

•Images may not be projected correctly depending on the type of the DVD player you use.

•Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.

EN-13