Viewing computer images
A. Connecting the projector to a computer
Preparation:
•Make sure that the power of the projector and that of the computer are turned off.
•When connecting the projector to a desktop computer, disconnect the RGB cables that are connected to the
monitor.
For analog connection:
COMPUTER IN/ COMPONENT VIDEO IN
1.Connect one end of the supplied RGB cable to the COMPUTER IN/COMPONENT VIDEO IN terminal of the projector.
1 |
|
2 | to monitor port |
| |
| RGB cable |
COMPONENT VIDEO IN
VIDEO IN
2.Connect the other end of the RGB cable to the monitor port of the computer.
•Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending on the type of the computer to be connected.
•When viewing images supplied from an
•This projector does not support
1 |
|
2 | to DVI |
| |
| DVI cable |
COMPONENT VIDEO IN |
|
For digital connection:
1.Connect one end of a commercially available DVI cable to the
2.Connect the other end of the DVI cable to the DVI terminal of the computer.
•Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending on the type of the computer to be connected.
•When viewing images supplied from a
VIDEO IN
•Turn on the power of the projector before that of the computer.
•Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending on the type of the computer to be connected.
•Use of a long cable may decrease the quality of projected images.
•Also read the instruction manual of the equipment to be connected.
•Images may not be projected correctly, depending on the type of the connected computer.
•Contact your dealer for details of connection.
B. Plugging the power cord
Plug the power cord in the same way as described in “Viewing video images.” (See Page 14.)
