Mitsubishi Electronics HC910 Specifications, Replacement part Option / Not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		HC910
Display Technology		0.65-inch Single chip DMD (Aspect ratio 16:9)
		Pixel 1024 x 576 = 589824 pixels
Projection lens		F 2.4 - 2.6 f= 23 - 27.6 mm
Light-source lamp		200 W
Image size (Projection distance)		40" min. to 275" max. (Projection distance 1.3 to 10 m)
Maximum number of display colors		16770000 (full-color display)
Maximum	Computer signal	Maximum resolution : 1280 x 1024 dots (Analog) / compressed
resolution		Panel resolution : 1024 x 576 dots
	Video signal	NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
	Component	480i, 480p, 576i, 576p, 720p, 1080i
	signal	Panel resolution : 1024 x 576 dots
Computer input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	D-SUB 15P	1
		Digital RGB	DVI	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA	1
		S-Video input	S	1
		Component video input	RCA	1
Control terminal/Others		RS-232C (8-pin)
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC100 - 240V, 50/60Hz
Power consumption		2.9 A
Dimensions		310 mm (W) x 100 mm (H) x 245 mm (D)		* Not included protrusion.
Weight		2.9 kg
Others	S-video input	Luminance signal : Vp-p=1.0 V 75Ω (negative sync)
		Chrominance signals : Vp-p=0.286 V 75Ω (burst signal)
	Video input	Vp-p=1.0 V 75Ω (negative sync)
	Component video	YCBCR : Vp-p=1.0 V 75Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75Ω (CB, CR)
	Analog input	RGB : Vp-p=0.7 V 75Ω (negative sync)
		YCBCR : Vp-p=1.0 V (Y)	(negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS : TTL-level (negative or positive polarity)
		VD : TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI interface (TMDS single link)

Replacement part

(Option / Not included in the box)

Spare lamp VLT-HC910LP

EN-36