CONNECTIONS
CONNECTION WITH SCSI DATA SIGNAL EQUIPMENT
2CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
1Press the POWER button to turn on the power.
2Press the DOOR OPEN button to open the door.
3Set the input select switch inside this unit to SCSI.
Push the center of the door to close.
4Press the POWER button to turn off the power.
Input select switch
5Connect the unit and the personal computer with a SCSI cable.
Connect this unit to a personal computer as shown below.
Make sure to turn off the main power of the unit and other equipment before connection.
To SCSI terminal
(Use terminator when no SCSI device is connceted.)
Terminator
To SCSI terminal
To SCSI terminal
Digital color printer
Personal computer
6Set the SCSI ID switch.
5 | 6 | 7 |
4 |
| 0 |
3 | 2 | 1 |
|
|
SCSI ID
Set the SCSI ID switch on the rear panel according to the personal computer connected.
•When some devices with SCSI interface are connected to the personal computer, do not select the ID number already in use for this printer.
•Turn the arrow with a screwdriver to set the ID number.
•The default setting is No. 5.
•No. 7 is allocated to the personal computer you use and No. 0 is allocated to the
7After verifying the connection, press the POWER button to turn on this unit.
8Turn on the power of the personal computer.
PRECAUTIONS | |
FEATURES | |
| |
CONNECTIONS | |
PREPARATION | |
SHOOTING | TROUBLE- |
| |
OTHERS | |
|
|
CONTENTS
9
