Unpacking, Unwrap the packing | Mitsubishi Electronics CP9500DW

UNPACKING

UNPACKING

Take the printer out of the box by the following procedures. Make sure to check the accessories.

1Open the top of the box.

2Remove the accessories together with upper cushions.

3Hold the handles of the cardboard and pull it up carefully to take

the printer together with the lower cushions out of the box.

Make sure to pull the cardboard straight up.

NOTE

This printer is about 17 kg in weight. Handle it with care.

4Separate the printer from the cushions.

Hold the parts indicated by the arrows and pull the printer straight up.

5Unwrap the packing.

Keep the cushions for transporting the printer again.

When moving this printer, hold the lower front part and the handle on the rear side.

Handle

2CONTENTS

The accessories are contained in the upper cushions. Check the contents.

PRECAUTIONS
FEATURES

CONNECTIONS
PREPARATION
SHOOTING	TROUBLE-

OTHERS

	Quick setup guide	Paper strip	CD-ROM	Paper flanges Spacers
		bin

Paper catcher

Power cords	SCSI
	terminator

Ink cassette

The ink cassette is contained in the printer.

CONTENTS

6

Image 9

Mitsubishi Electronics CP9500DW operation manual Unpacking, Separate the printer from the cushions, Unwrap the packing

Contents

CP9500DW Information Page Contents Protective Measures Safety Precautions Safety Precautions Installation LocationsFor Long Operating Life Other Cautions Special Features Special Features Unpacking UnpackingSeparate the printer from the cushions Unwrap the packing Front Panel Features & Functions Features & Functions Side and Rear PanelLeft Side Rear Connecting to Personal Computer Example Connection with Scsi Data Signal EquipmentPress the Power button to turn off the power Set the Scsi ID switch Connections Connection with USB Data Signal Equipment Setting DIP Switches Setting of DIP Switches Before Operation Installation of Print Paper Before Operation 4Install the print paper into the unit Installing the INK Ribbon Installation of INK RibbonInstalling the INK Cassette 1Load the ink ribbon in the ink cassette as shown below Push the center of the door to close Push the ink cassette toward the back of the unit Before Printing Handling of Paper / INK Ribbon SETAfter Printing Storage of Paper / INK Ribbon SET Installation of Printer Driver Indications on the Front Panel and Countermeasures Error Messages & Countermeasures When the manual & cut mode has been selected Error Messages & CountermeasuresOvercoming Paper Jams Remove the ink cassette Others Contents Before Calling for ServiceInstructions for Transportation Use the original packaging Preparations for Cleaning CleaningThermal Head Cleaning Paper Flange Cleaning Specifications SpecificationsContents of CD-ROM Mitsubishi Electric Europe B.V UK Branch