Monitor Audio EN 50082-1, EN 55013 Fine-tuning the loudspeakers, Specifications In-Ceiling

Fine-tuning the loudspeakers

The following adjustments can be made to your CP in-ceiling loudspeakers as follows:

1.Pivoting tweeters (all CP In-Ceilingmodels) can be tilted up to 18 degrees in all directions to provide optimum coverage if the following applies:

2.If the speakers are widely separated such that the music fails to blend into a central image when operated in stereo mode then tilt the tweeter towards the listening area.

3.If the Soundstage seems too confined tilt the tweeter away from the listening area.

4.For further fine-tuning options of your CP In-Ceilingspeakers please go to page 6.

Specifications - In-Ceiling

Model	Gold CP	Silver CP		Bronze CP
	In-Ceiling	In-Ceiling		In-Ceiling
Frequency	55Hz – 30KHz	60Hz – 30KHz		62Hz – 22 KHz
response
Impedance	8 Ohms	8 Ohms		8 Ohms
(nominal)
Sensitivity (1W@1M)	89dB	89dB		88dB
Maximum SPL	106.5 dBA	105.8 dBA		105 dBA
Power handling	120W	100W		80W
Recommended
Amp	30-120W	30-100W		20-80W
requirements
Bass alignment	Sealed enclosure	Sealed enclosure		Sealed enclosure
Drive unit	1x 6.5” C-CAM bass driver			1x 6.5” MMP2 second
		1x 6” C-CAM bass driver		generation Metal Matrix
complement bass	featuring RST technology
				Polymer
Drive unit	Pivoting 25mm C- CAM gold	Pivoting 25mm C- CAM gold		Pivoting 25mm C- CAM gold
	alloy dome with
complement		alloy dome with		alloy dome with rare earth
	high power ceramic
tweeter		rare earth magnet		magnet
	magnet system
Overall diameter	281mm (11 1/16 inch)	281mm (11 1/16 inch)		281mm (11 1/16 inch)
Overall depth	181mm (7 1/8 inch)	181mm (7 1/8 inch)		181mm (7 1/8 inch)
Cut-out hole	250mm (9 7/8 inch)	250mm (9 7/8 inch)		250mm (9 7/8 inch)
diameter
Mounting depth	175mm (6 7/8 inch)	175mm (6 7/8 inch)		175mm (6 7/8 inch)
mm (inch)
	+3db / 0dB / -3dB
	High frequency	+3db / 0dB / -3dB
	attenuation switch.
Controls		High frequency		N/A
	+3db / 0dB / -3dB
		attenuation switch
	Mid-range frequency
	attenuation switch.
Fixing type	4 position ‘dog’ type fixings	4 position ‘dog’ type fixings		4 position ‘dog’ type fixings
Connection	Gold plated ‘push’ type	Gold plated ‘push’ type		Gold plated ‘push’ type
	terminals	terminals		terminals
Baffle material	MDF	MDF		MDF
Back box/	Mineral filled ABS plastic (UL	Mineral filled ABS plastic (UL		Mineral filled ABS plastic (UL
mounting flange
	V1 fire rated)	V1 fire rated)		V1 fire rated)
material
Unit weight Kg	3.0Kg (6.6Ib)	2.5Kg	(5.5Ib)	2.4Kg (5.3lb)
(lb)

5