Playing a Built-in Tune
To pause playback
1Press the PAUSE button while a tune is playing to pause it.
2Pressing the PAUSE button again resumes play from the point where it was paused.
To fast reverse
1While a tune is playing or paused, hold down the REW button to skip in a reverse direction at high speed.
•The fast reverse operation skips back one measure at a time.
•The measure and beat numbers on the display change while the fast reverse operation is being performed.
Measure number Beat number
2Releasing the REW button starts song playback from the measure whose number is shown on the display.
NOTE
•Fast reverse does not work while tune play is stopped.
•Certain playback conditions can cause it to take some time before fast reverse starts after you press the REW button.
To fast forward
1While a tune is playing or paused, hold down the
FF button to skip forward at high speed.
•The fast forward operation skips forward one measure at a time.
•The measure and beat numbers on the display change while the fast forward operation is being performed.
Measure number Beat number
2Releasing the FF button starts song playback from the measure whose number is shown on the display.
NOTE
•Fast forward does not work while tune play is stopped.
Looping a Musical Phrase
You can select one or more measures and “loop” them, which means that they play again and again until you stop playback.
1While the tune is playing, press the REPEAT button while the measure you want to start from is playing.
•This causes the repeat indicator to flash on the display, and displays the measure number of the start measure.
2When playback is within the measure you want to specify as the end of the loop, press the REPEAT button again.
•This displays the measure number of the end measure, and starts repeat play of the loop.
•To cancel repeat play of a loop, press the REPEAT button again so the repeat indicator is not displayed.