The track that is currently selected is indicated by the part/ track indicator (L or R) that appears on the display as described below.
RIGHT/TRACK 2
Track 2
SMF data on a SmartMedia card.
Track 1
LEFT/TRACK 1
• You cannot record a lesson when the lesson song is
To select this track:
Press this button:
NOTE
Press the part/track button that corresponds to the track you want to select.
• If you want to hear what you recorded immediately, press the controller block START/STOP button again.
Selecting a Track
Play the notes for the part(s) you selected in step 4 on the keyboard.
Use this procedure when you want to record what you play on the keyboard in real time. Performance recording records both the notes you play and any accompaniment patterns that you use.
• This starts recording.
Recording a Performance
Press the controller block START/STOP button.
6
7
8 To stop recording, press the controller block START/ STOP button again.
STOP button again.
• Tone (page E-18)
• Tempo (page E-22)
To stop playback, press the controller block START/
4
Configure the following settings as required.
5
contents.
• You can adjust the tempo at this point, if you want.
buttons at the same time.
• This starts playback of Song Memory lesson recording
• If you want to mute and play both parts, press both
2 Use the SONG MEMORY button to select playback standby.
3 Press the controller block START/STOP button.
4 Use the LEFT/TRACK 1 button or RIGHT/TRACK 2 button to select the part(s) (left-hand, right-hand) you want to mute in the built-in tune playback and play along on the keyboard.
Press the SONGS button or the PIANO SONGS button to select the bank of the built-in tune that you originally used to record the lesson recording.
1
Select the tune you want to play along with.
• See “To play back a SONGS tune” on page E-21 for information about selecting SONGS tunes, and “To play back a PIANO SONGS tune” on page E-22 for information about selecting PIANO SONGS tunes.
3
Playing Back a Lesson Recording
2 Use the SONG MEMORY button to select record standby.
• This causes the SONG MEMORY indicator to flash on the display.
• Tone setting
• Tempo setting
• Tune name
• Recording part selection
• Pedal operations
• Layer and split settings, and their tone settings
1 Press the SONGS button or PIANO SONGS button to select the mode that includes the tune you want to play along with.
Lesson Recording Data
In addition to the notes you play on the keyboard and the accompaniment of the built-in song you selected, the following data is also stored by a lesson recording operation.
To record as you play along with a built-in tune
Song Memory Function