Installation procedures

Painting

NOTE: If you are choosing to paint your 100 Series loudspeaker, we recommend you do this prior to installation by following these simple steps:

1.Remove the membrane scrim from the inside of the grille (do not fit grille to speaker frame).

2.Place paint mask over the speaker baffle.

3.Paint both the frame and the grille at the same time and with the same batch of paint (if they are to be the same colour).

4.When they are both dry, remove the paint mask from the baffle, and place the spare membrane scrim (in the packaging) into the inside of the grille.

5.Your product(s) are now ready to install, including fitting the grille.

Using Pre-Construction Brackets

If the holes have been pre-cut, simply refer to step 4 onwards (below) for full fitting instructions.

If pre-construction brackets have been used prior to the fixing of plaster board/ sheet rock and the holes have not been cut, locate the pre-construction brackets and cut around the inside edge of the bracket. Locate the speaker cable, connect to the sprung terminals and fit the speaker. Refer to the fitting instructions below (step 4 onwards).

To fine-tune the speakers please refer to the high frequency control and boundary compensation details below

Using the Fixing Template

1.Use template to locate position of cut out. The adhesive backing allows for repositioning a number of times.

2.Draw around diameter of the template.

3.Remove template and cut hole.

4.Locate speaker cable and connect by pushing the terminals in and releasing to clamp the cables.

5.Fit product into prepared hole and tighten fixing clamps. These will move outwards automatically upon tightening! DO NOT OVER TIGHTEN! Once contact is made 2-3 turns are all that is required.

6.To fine-tune the speakers please refer to the high frequency control details below.

High Frequency control

The factory H.F setting provides a flat or 0dB level, which will suit the majority of typical installations.

Setting the switch in the +3dB position will add brightness and additional clarity to the system. This may be effective in a room with a large amount of soft furnishings.

Setting the switch in the -3dB position will reduce the brightness and provide a duller sound. This may be effective in a room with a few of soft furnishings, or in an installation with a wooden floor.

Monitor Audio Ltd

Unit 2, 24 Brook Road

Rayleigh, Essex

SS6 7XL

England

Tel: 01268 740580

Fax: 01268 740589

Email: info@monitoraudio.co.uk

monitoraudio.co.uk

Designed in the United Kingdom

Installation Guide

100 Series

monitoraudio.co.uk

100 specifications

The Monitor Audio 100 is a testament to the brand's dedication to producing high-fidelity audio products that cater to both casual listeners and audiophiles alike. With its sleek design and exceptional sound quality, the Monitor Audio 100 is an excellent choice for those looking to elevate their listening experience.

One of the standout features of the Monitor Audio 100 is its advanced driver technology. The speaker is equipped with a 5.25-inch C-CAM (Ceramic-Coated Aluminum Magnesium) bass driver that provides deep and impactful bass response, enriching the overall audio experience. The C-CAM technology ensures that the cone is both lightweight and rigid, resulting in accurate sound reproduction across a wide frequency range. The tweeter, also constructed from C-CAM, boasts a 1-inch design that delivers clear and detailed high frequencies, ensuring that every note and nuance in music is faithfully reproduced.

The Monitor Audio 100 is also known for its impressive performance in various acoustic environments. It features the brand's innovative H.A.M.R. design (High Excursion, Low Distortion), which allows the bass driver to move more freely, producing a richer and more dynamic sound without distortion, even at higher volume levels. This makes it an ideal choice for both music enthusiasts and movie lovers seeking an immersive audio experience.

In addition to its outstanding sound quality, the Monitor Audio 100 is designed with aesthetics in mind. The elegant cabinet is available in multiple finishes, allowing it to blend seamlessly into any home décor while minimizing resonance and enhancing acoustic performance. The compact design makes it suitable for both bookshelf and stand-mounted placement, offering versatility in various setups.

Connectivity is also a highlight of the Monitor Audio 100. The speaker features bi-wiring and bi-amping capabilities, which allow users to connect multiple amplifiers for enhanced performance and customization. This feature is particularly beneficial for audiophiles who seek to optimize their audio systems.

Overall, the Monitor Audio 100 stands out for its combination of high-quality components, advanced technology, and elegant design. Whether used in a home theater system or a dedicated listening room, this speaker delivers a remarkable audio experience, making it a worthy investment for anyone seeking superior sound performance. With its blend of form and function, the Monitor Audio 100 undoubtedly makes a significant impact in the world of high-fidelity audio.