Installation guide, Series, Introduction

Dean Hartley (Technical Director) Monitor Audio Ltd

England

Installation guide

100 Series

The 100 Series utilises bass drivers featuring the advanced MMP®II cone technology together with Monitor Audio’s trade mark C-CAM®gold dome tweeter. The MMP®II (Metal Matrix Polymer) cone material uses a high-pressure injection moulding process to achieve different thicknesses at critical points in the cone geometry.

C165

C180

C165-T2

C180-T2

C-CAM®MMP® II Tri-Grip H.FC-CAM®MMP®II Tri-Grip H.FC-CAM®MMP® II Tri-GripC-CAM®MMP®II Tri-Grip H.F

W165W180

C-CAM®MMP®II Tri-Grip

H.F

C-CAM®MMP®II Tri-Grip

H.F

High frequency performance has been improved by the evolution of the C-CAM®tweeter. The new tweeter utilises a pivoting action to provide optimum imaging and flexible set-up options. High frequency level control is provided to offer a degree of balance adjustment once installation is completed. See page 2.

Introduction

Please read this installation guide carefully before proceeding.

ALSO AVAILABLE: Pre-construction brackets. These are for use when installing any Custom Installation product before the plaster board/ rock wall, is fitted. They show the location of the speakers to the builder, allow pre-wiring and give them a solid secure edge to cut around. Please ask your dealer about these brackets and to confirm which is correct for your installation.

PLEASE CHECK YOU HAVE THE FOLLOWING ITEMS IN THIS KIT BEFORE PROCEEDING:

•1 x Complete speaker & tweeter assembly.

•1 x Grille (which can be painted).

•1 x Mounting cut out template (in packaging).

•1 x Plastic paint mask (for covering the baffle while painting the frame).

•1 x Self adhesive grille membrane scrim (to be attached to the inside the grille after it has been painted).

•1 x Guarantee card in this manual.

Prior to Installation Check the Following:

•	Please check the minimum depth of the product (according to the specifications sheet) is correct for the assembly to
	fit into recess.
•	The fixing clamps require a minimum of 25mm (1 Inch) of surface area around the cut-out hole to ensure a secure
	fixing!
•	100 Series loudspeakers are splash and moisture proof, so they can be used in bathrooms, pool areas, etc. DO NOT
	allow them to be in constant contact with water/moisture.
•	The fixing clamps will operate on ceilings/walls with a minimum thickness of 9mm (3/8 Inches) to a maximum depth

Frequency Response	Frequency Response	Frequency Response	Frequency Response
60Hz - 25KHz	50Hz - 25KHz	60Hz - 25KHz	50Hz - 25KHz
Impedance (nominal)	Impedance (nominal)	Impedance (nominal)	Impedance (nominal)
6 Ohms	6 Ohms	6+6 Ohms	6+6 Ohms
Sensitivity (1W@1M)	Sensitivity (1W@1M)	Sensitivity (1W@1M)	Sensitivity (1W@1M)
88.5 dB	90 dB	89 dB	90 dB
Maximum SPL	Maximum SPL	Maximum SPL	Maximum SPL
107.4 dBA	111.6 dBA	107.9 dBA	111.6 dBA
Power Handling (R.M.S)	Power Handling (R.M.S)	Power Handling (R.M.S)	Power Handling (R.M.S)
65 W	120 W	65 W	120 W
Recommended Amp	Recommended Amp	Recommended Amp	Recommended Amp
10 - 65 W	15 - 120 W	10 - 65 W	15 - 120 W
Driver	Driver	Driver	Driver
1 x 6.5” MMP®II cone bass driver	1 x 8” MMP®II cone bass driver	1 x 6.5” MMP®II ‘cone bass driver	1 x 8” MMP®II ‘cone bass driver
1 x 1” C-CAM®pivoting gold	1 x 1” C-CAM®pivoting gold	2 x 1” C-CAM®pivoting gold	2 x 1” C-CAM®pivoting gold
dome tweeter	dome tweeter	dome tweeter	dome tweeter
Controls	Controls	Overall Diameter	Controls
+3db / 0db / -3db High	+3db / 0db / -3db High	250mm (9 13/16 inch)	+3db / 0db / -3db High
Frequency Level Switch	Frequency Level Switch	Overall Depth	Frequency Level Switch
		Overall Depth
Overall Diameter	Overall Diameter	117 mm (4 5/8 inch)	Overall Diameter
250 mm (9 13/16 inch)	286 mm (11 1/4 inch)	Cut-out Hole Diameter	286 mm (11 1/4 inch)
		Cut-out Hole Diameter
Overall Depth	Overall Depth	211mm (8 5/16 inch)	Overall Depth
117 mm (4 5/8 inch)	124 mm (4 7/8 inch)	Mounting Depth	124 mm (4 7/8 inch)
		Mounting Depth
Cut-out Hole Diameter	Cut-out Hole Diameter	112 mm (4 7/16 inch)	Cut-out Hole Diameter
211 mm (8 5/16 inch)	247 mm (9 3/4 inch)	Fixing Type	247 mm (9 3/4 inch)
		Fixing Type
Mounting Depth	Mounting Depth	3 position Tri-Grip dog fixings	Mounting Depth
112 mm (4 7/16 inch)	119 mm (4 11/16 inch)	Cable Connection	119 mm (4 11/16 inch)
		Cable Connection
Fixing Type	Fixing Type	Gold plated ‘push’ type terminals	Fixing Type
3 position Tri-Grip dog fixings	3 position Tri-Grip dog fixings	Construction Material	3 position Tri-Grip dog fixings
		Construction Material
Cable Connection	Cable Connection	Mineral filled ABS plastic (UL94-VO	Cable Connection
Gold plated ‘push’ type terminals	Gold plated ‘push’ type terminals	rated, RoHS compliant)	Gold plated ‘push’ type terminals
Construction Material	Construction Material	Pre-construction Bracket	Construction Material
Mineral filled ABS plastic (UL94-VO	Mineral filled ABS plastic (UL94-VO	CB6 (Purple)	Mineral filled ABS plastic (UL94-VO
rated, RoHS compliant)	rated, RoHS compliant)	Weight Kg (lb)	rated, RoHS compliant)
		Weight Kg (lb)
Pre-construction Bracket	Pre-construction Bracket	2.08Kg (4.6 lbs)	Pre-construction Bracket
CB6 (Purple)	CB8 (Green)		CB8 (Green)
Weight Kg (lb)	Weight Kg (lb)		Weight Kg (lb)
1.92 Kg (4.2 lbs)	2.72 Kg (6 lbs)		3 Kg (6.6 lbs)

Frequency Response 60Hz - 25KHz

Impedance (nominal)

6 Ohms

Sensitivity (1W@1M) 88.5 dB

Maximum SPL 107.4 dBA

Power Handling (R.M.S) 65 W

Recommended Amp 10 - 65 W

Driver

1 x 6.5” MMP®II ‘cone bass driver

1 x 1” C-CAM®pivoting gold dome tweeter

Controls

+3db / 0db / -3db High Frequency Level Switch

Overall Dimensions H 368 x W 248.5mm (14 1/2 x 9 13/16 inch)

Overall Depth 94.5mm (3 3/4 inch)

Cut-out Hole Size

H 332 x W 212.5mm (13 1/16 x 8 3/8 inch)

Mounting Depth

90 mm (3 9/16 inch)

Fixing Type

6 position Tri-Grip dog fixings

Cable Connection

Gold plated ‘push’ type terminals

Construction Material

Mineral filled ABS plastic (UL94-VO rated, RoHS compliant)

Pre-construction Bracket

WB6 (purple)

Weight Kg (lb) 2.24 Kg (4.9 lbs)

Frequency Response 50Hz - 25KHz

Impedance (nominal)

6 Ohms

Sensitivity (1W@1M)

90 dB

Maximum SPL 111.6 dBA

Power Handling (R.M.S) 120 W

Recommended Amp 15 - 120 W

Driver

1 x 8” MMP®II ‘cone bass driver

1 x 1” C-CAM®pivoting gold dome tweeter

Controls

+3db / 0db / -3db High Frequency Level Switch

Overall Dimensions H 423 x W 270mm (16 5/8 x 10 5/8 inch)

Overall Depth

103 mm (4 1/16 inch)

Cut-out Hole Size H 387 x W 234mm (15 1/4 x 9 3/16 inch)

Mounting Depth

98.5 mm (3 7/8 inch)

Fixing Type

6 position Tri-Grip dog fixings

Cable Connection

Gold plated ‘push’ type terminals

Construction Material

Mineral filled ABS plastic (UL94-VO rated, RoHS compliant)

Pre-construction Bracket

WB8 (Green)

Weight Kg (lb) 3.08 Kg (6.8 lbs)

	of 32mm (1¼ Inches).
•	Do not attempt to fix these speakers to your ceiling/wall if you are unsure of your ability to provide a secure and safe
	fixing. IF IN DOUBT CONTACT YOUR LOCAL AUTHORISED MONITOR AUDIO DEALER.
•	Ensure that there are no water pipes, air ducts or electricity cables running immediately behind the cut out area!
•	Please work from secure steps or scaffold and avoid trailing wires for your safety and those around you.
•	Always turn off the amplifier or other devices in the system when connecting these speakers.

Declaration of Conformity

We, Monitor Audio Ltd.

24 Brook Road

Rayleigh

Essex

SS6 7XL

England

Declare in own responsibility, that the products described in this manual are in compliance with technical standards:

EN 50082-1 : 1998

EN 55013 : 2001

EN 50020 : 2002

100 specifications

The Monitor Audio 100 is a testament to the brand's dedication to producing high-fidelity audio products that cater to both casual listeners and audiophiles alike. With its sleek design and exceptional sound quality, the Monitor Audio 100 is an excellent choice for those looking to elevate their listening experience.

One of the standout features of the Monitor Audio 100 is its advanced driver technology. The speaker is equipped with a 5.25-inch C-CAM (Ceramic-Coated Aluminum Magnesium) bass driver that provides deep and impactful bass response, enriching the overall audio experience. The C-CAM technology ensures that the cone is both lightweight and rigid, resulting in accurate sound reproduction across a wide frequency range. The tweeter, also constructed from C-CAM, boasts a 1-inch design that delivers clear and detailed high frequencies, ensuring that every note and nuance in music is faithfully reproduced.

The Monitor Audio 100 is also known for its impressive performance in various acoustic environments. It features the brand's innovative H.A.M.R. design (High Excursion, Low Distortion), which allows the bass driver to move more freely, producing a richer and more dynamic sound without distortion, even at higher volume levels. This makes it an ideal choice for both music enthusiasts and movie lovers seeking an immersive audio experience.

In addition to its outstanding sound quality, the Monitor Audio 100 is designed with aesthetics in mind. The elegant cabinet is available in multiple finishes, allowing it to blend seamlessly into any home décor while minimizing resonance and enhancing acoustic performance. The compact design makes it suitable for both bookshelf and stand-mounted placement, offering versatility in various setups.

Connectivity is also a highlight of the Monitor Audio 100. The speaker features bi-wiring and bi-amping capabilities, which allow users to connect multiple amplifiers for enhanced performance and customization. This feature is particularly beneficial for audiophiles who seek to optimize their audio systems.

Overall, the Monitor Audio 100 stands out for its combination of high-quality components, advanced technology, and elegant design. Whether used in a home theater system or a dedicated listening room, this speaker delivers a remarkable audio experience, making it a worthy investment for anyone seeking superior sound performance. With its blend of form and function, the Monitor Audio 100 undoubtedly makes a significant impact in the world of high-fidelity audio.