Radio Shack AFX-300 owner manual Fm Page 31 Wednesday, August 18, 1999 951 AM

43-1245.fm Page 31 Wednesday, August 18, 1999 9:51 AM

Programming from an Extension Phone

Note: It is not unusual to hear beeping/buzzing or the opera- tor’s voice on the line as you program the AFX-300 from an ex- tension phone.

1.Pick up any phone on the same line as the AFX-300, except the built-in phone (if any) on your fax machine.

2.Press 1, , then the 2-digit access code. The AFX-300 beeps once.

Note: If you enter the access code incorrectly, simply try again.

3.Enter a remote command by pressing then the num- ber(s) for the desired command. The AFX-300 beeps either two or three times, depending on the command you entered. See “Program Command Descriptions” on Page 33.

Note: If you enter the programming command incor- rectly, simply try again.

4.Hang up the phone.

Note: To program another feature, repeat these steps.

31