MK Sound LCD-25, LCD-35 operation manual If YOU Need Service

Page 14

SATELLITE SPEAKER

A.If the component has high-pass filters for the Left, Center, and Right channels (usually only THX components have these filters), they should be turned on or set to THX (if you have a choice, use the frequency closest to 100Hz - 120 Hz for Xenon series speakers. The surround channels in a Pro-Logic only system do not have switchable filters.

B.Set the center channel to Normal, unless you have a THX controller. With a THX controller, set the center channel to the THX setting.

C.Turn off all limiters and compressors, auto azimuth controls, auto balance controls, etc.

D.If the processor/receiver/receiver has an input level control, calibrate it per the manufacturer’s instructions.

E.If the component has a digital input, and you are using a source component with a digital output, always use the digital input, not the analog input.

9.Set levels for each channel. Take the measurement at the listening position to establish the reference level. Set all channels to exactly the same level.

Use a Sound Level Meter. Point it directly at the speaker being measured. Set all channels to the same level, using the processor/receiver/receiver’s internal test signal. Set the meter to “C” weighting and “Slow” response. Set the levels to 75 dB if you have a THX processor/receiver/receiver or are using the Video Essentials disc as a source for setting levels.

NOTE: If you using identical speakers anywhere in your system (e.g., S-150THX speakers for the left, center, and right channels), all of those channels should be set to the same level. If your meter measures a different level, it is probably a limitation of this type of meter measurement method and not an actual audible level difference. Set the channels using identical speakers to the same level, unless you actually hear a difference later when you are doing listening to verify the system setup.

10.Check phase. Make sure that all five main channel speakers are wired in phase. The Video Essentials disc has tests for main speaker phase.

11.Make sure that the subwoofer and main speakers are in phase at the 80 Hz crossover point. Listen to something with a consistent bass line around 80 Hz while a partner switches the “Phase” control on the subwoofer from “+” to “-”. The switch position that results in the greatest bass at the listening position is the correct setting.

12.Play something that is familiar to you through the system to verify the system’s overall performance. If something does no sound right, recheck your connections and settings. Re-measure, re-check, re-align.

13.Switch the processor/receiver to each input that you will use. Check your settings for each input and each mode. Some processor/receivers require that you enter settings separately for each mode and/or input.

14.Before playing the system, check levels and speaker alignment one last time. Make sure that you write down all processor settings for future reference.

12. IF YOU NEED SERVICE

Contact your dealer or M&K with a complete description of the problem. Please have the unit's model and serial numbers (found on the back of the cabinet), date of purchase, and your dealer's name. You can call M&K between 8:30 AM and 5:00 PM Pacific Time, Monday through Friday, at (818) 701-7010.

Alternatively, an email can be sent to service@mksound.com.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Satellite speaker Table of Contents Speaker HOOK-UP Placement of Your SpeakersIntroduction Height or Angle Optimizing Speaker PlacementHookup Location Away from Reflecting Surfaces Separation Between Left and Right SpeakersTripole Surround 25 Speaker Height TIMBRE-MATCHING Home Theatre UsageLEVEL-MATCHING Center ChannelSurround Channels Subwoofer USE with M&K STBT5 Wall BracketSATELLITE/SUBWOOFER Phasing Test Speaker Damage & HOW to Avoid IT 11. M&K 5.1 Multichannel & PRO-LOGIC System Setup Guide Satellite Speaker If YOU Need Service Specifications 13. M&K 10 Year WarrantyCabinet Maintenance

LCD-35, LCD-25 specifications

MK Sound has long been synonymous with high-quality audio performance, and its LCD series of loudspeakers, including the LCD-25 and LCD-35, continues this tradition. Both models embody the company's dedication to delivering exceptional sound quality, precision engineering, and innovative technologies tailored for audiophiles and casual listeners alike.

The MK Sound LCD-25 is a compact yet powerful loudspeaker designed to deliver an immersive listening experience. It features a 5.25-inch woven composite woofer that provides a robust low-frequency response, while a 1-inch silk dome tweeter ensures smooth high-frequency reproduction. This combination creates a balanced sound profile that is ideal for various musical genres and movie soundtracks. The LCD-25 is equipped with a bass reflex design, enhancing its overall efficiency and delivering deep, punchy bass without distortion.

On the other hand, the MK Sound LCD-35 takes it up a notch with its larger 6.5-inch woofer for even deeper bass response and a more impactful soundstage. The LCD-35 also integrates a 1-inch silk dome tweeter and features an updated crossover network that ensures seamless integration between the woofer and tweeter, resulting in a more cohesive sound. Both models utilize MK Sound’s proprietary technology to minimize interference and ensure clarity in sound reproduction, making them ideal for critical listening environments.

One significant feature of both the LCD-25 and LCD-35 is their exceptional build quality. The cabinets are constructed from high-density MDF, which reduces resonance and acoustic interference, allowing for a more accurate soundstage. Additionally, they come with an attractive finish that complements any décor, making them suitable for both home and professional settings.

Another noteworthy characteristic is the versatility of both models. They can be used in various configurations, including stereo setups, home theaters, or as part of a professional audio system. With their high sensitivity ratings, the LCD-25 and LCD-35 can be easily paired with a variety of amplifiers without sacrificing sound quality.

In conclusion, the MK Sound LCD-25 and LCD-35 are exemplary loudspeakers that offer remarkable sound performance, high-quality construction, and flexible application. Whether for home audio enthusiasts or professional settings, these models signify the best of what MK Sound has to offer in the world of high-fidelity audio.
Top Page Image Contents