MK Sound LCD-25, LCD-35 Home Theatre Usage, Level-Matching, Timbre-Matching, Center Channel

Page 8

SATELLITE SPEAKER

e. USE WITH SURROUND-EX AND OTHER 6.1 CHANNEL SYSTEMS

When using the Surround-25 speaker with a 6.1 channel system, we strongly recommend using two speakers to reproduce the back surround channel. These speakers should be mounted on the center area of the back wall of the room, symmetrical to the wall’s center line.See FIGURE 6, page 7. Follow your processor or receiver’s instructions for proper calibration.

7. HOME THEATRE USAGE

LEVEL-MATCHING

The factor most critical to achieving excellent Home Theatre performance is level-matching the three front and two surround channels. This is even more important than timbre-matching. We strongly recommend that you purchase a Radio Shack Sound Level Meter which is available for less than about $50, (get the analog meter, not the digital) and use it to measure the output of the speakers when playing the test tones generated by your processor or receiver.

Set the meter to the "C" weighting scale and “SLOW” response, using your amplifier or receiver's internal noise calibration test, set the levels so that all channels measure the same level. WHENEVER POSSIBLE, DO NOT CALIBRATE LEVELS BY EAR! Using a meter is an inexpensive way to be certain that your system is calibrated properly.

TIMBRE-MATCHING

One of the most important factors in achieving excellent Home Theatre performance is timbre- matching. On film soundtracks, specific sounds are often moved from left to right or from front to back in the room. When the speakers reproducing these sounds have dissimilar characteristics, there will be an audible discontinuity when the sound shifts from one speaker to another.

Timbre-matched speakers have very similar tonal characteristics and sound, which come from three critical elements: similar or identical drivers; similar or identical crossovers; and similar or identical frequency response. In full M&K systems, these elements have been addressed. You can be assured that the system can achieve the full potential of multichannel sound.

When you have a multichannel system, speaker placement becomes extremely important, as you will be balancing four or five (or more) speakers rather than two. The following guidelines are for a 5.1 channel system, but if you do not have a Center channel, the instructions for the other four channels still apply.

CENTER CHANNEL

The Center channel speaker in a multichannel system is the most important speaker in the system. This speaker often produces more output than the left and right speakers combined. This speaker should be of the highest possible quality, and as similar as possible in response and radiation pattern to the left and right speakers. Three identical speakers are best, unless the center channel is designed to work with a set of left and right speakers.

It is also important to have as much amplifier power as possible for the Center channel. As a minimum, the three front channels should be identical in power output, but it is better if the Center channel has more. If you have less power in the Center channel, this will be the limiting factor in the total output capability of the system when watching and listening to video sources.

The Center channel speaker should be located as close as physically possible to the television or projection screen, preferably just above or below the screen. If that is not possible, then just to the left or the right of the screen may be acceptable.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Satellite speaker Table of Contents Speaker HOOK-UP Placement of Your SpeakersIntroduction Height or Angle Optimizing Speaker PlacementHookup Location Away from Reflecting Surfaces Separation Between Left and Right SpeakersTripole Surround 25 Speaker Height Home Theatre Usage LEVEL-MATCHINGTIMBRE-MATCHING Center ChannelSurround Channels Subwoofer USE with M&K STBT5 Wall BracketSATELLITE/SUBWOOFER Phasing Test Speaker Damage & HOW to Avoid IT 11. M&K 5.1 Multichannel & PRO-LOGIC System Setup Guide Satellite Speaker If YOU Need Service Specifications 13. M&K 10 Year WarrantyCabinet Maintenance

LCD-35, LCD-25 specifications

MK Sound has long been synonymous with high-quality audio performance, and its LCD series of loudspeakers, including the LCD-25 and LCD-35, continues this tradition. Both models embody the company's dedication to delivering exceptional sound quality, precision engineering, and innovative technologies tailored for audiophiles and casual listeners alike.

The MK Sound LCD-25 is a compact yet powerful loudspeaker designed to deliver an immersive listening experience. It features a 5.25-inch woven composite woofer that provides a robust low-frequency response, while a 1-inch silk dome tweeter ensures smooth high-frequency reproduction. This combination creates a balanced sound profile that is ideal for various musical genres and movie soundtracks. The LCD-25 is equipped with a bass reflex design, enhancing its overall efficiency and delivering deep, punchy bass without distortion.

On the other hand, the MK Sound LCD-35 takes it up a notch with its larger 6.5-inch woofer for even deeper bass response and a more impactful soundstage. The LCD-35 also integrates a 1-inch silk dome tweeter and features an updated crossover network that ensures seamless integration between the woofer and tweeter, resulting in a more cohesive sound. Both models utilize MK Sound’s proprietary technology to minimize interference and ensure clarity in sound reproduction, making them ideal for critical listening environments.

One significant feature of both the LCD-25 and LCD-35 is their exceptional build quality. The cabinets are constructed from high-density MDF, which reduces resonance and acoustic interference, allowing for a more accurate soundstage. Additionally, they come with an attractive finish that complements any décor, making them suitable for both home and professional settings.

Another noteworthy characteristic is the versatility of both models. They can be used in various configurations, including stereo setups, home theaters, or as part of a professional audio system. With their high sensitivity ratings, the LCD-25 and LCD-35 can be easily paired with a variety of amplifiers without sacrificing sound quality.

In conclusion, the MK Sound LCD-25 and LCD-35 are exemplary loudspeakers that offer remarkable sound performance, high-quality construction, and flexible application. Whether for home audio enthusiasts or professional settings, these models signify the best of what MK Sound has to offer in the world of high-fidelity audio.
Top Page Image Contents