Toshiba TIC-LF232A specifications Specification Code for converters LF232

TIC-LF232A

Table 1. Specification Code for converters (LF232)

	Model					Specification Code				Contents
1	2	3	4	5	6	7	8	9	10 11 12 13 14
L	F	2	3	2						Separate type converter
					A					Purpose
										Standard
						A				Compatible detectors (Note1,2,3)
										Medium to small-size detectors:
						B				Meter size 1/10” to 18” (2.5 to 450 mm)
										Large-size detectors:
										Meter size 28” to 120” (700 to 3000 mm)
							C			Mounting nuts and bolts
										Panel, wall mounting (BNP material : SUS304)
							E			Pipe mounting (BNP material : SUS304)

Digital input/output

1Current output

+Digital output points (1 point)

3Current output

+Digital output points (4 points) + Digital input points (2 points)

Communication function

1HART communication

Power supply

1100Vac-240Vac, 50/60Hz (Note 2)

224Vdc (Note 3)

AStandard

Note 1: For applicable detector code, select one from the following table.

To combine with an existing detector, select one depending on the type of replaceable converters. For combination with detectors not listed below, contact Toshiba.

Applicable	Applicable	Applicable detector		Replaceable converters
detector code	detector	(discontinued model)
	LF470 type	334,		372, LF200, LF220, LF420,
A		335	type (Converters of	LF230* A type
		types shown right)
	LF150 type	337,		373, 378, LF230* B type
B		335	type (Converters of
		types shown right)

Note 2: When the 7th digit is “B” and power supply specification code is “1”, power supply specification is 100 to 120VAC.

Note 3: 24VDC can be specified only when the 7th digit is “A”.

7