Toshiba GA-1121 manual Output profile is applied to all data in the print job see

Page 19

11-5 Managing color on the GA-1121

GA-1121 color print option	What it does

(Other) Phosphors	Applies the specified phosphor (monitor type) information to the RGB
Hitachi EBU/Hitachi-Ikegami/NTSC/	source space definition (see page 1-11). To use this print option, you must
Radius Pivot/SMPTE/Trinitron	choose Other as the RGB Source Profile setting. This option is only available
(Default set at Setup or with ColorWise Pro	with the PostScript driver.
Tools)

Output Profile	The output profile is applied to all data in the print job (see page 1-15).
Color-MFP US v1.1F Fiery/	User-defined output profiles can be downloaded to the GA-1121 using
Color-MFP Thick1 v1.1F Fiery/	ColorWise Pro Tools. For more information about using ColorWise Pro Tools,
Color-MFP Thick2 v1.1F Fiery/	see Chapter 3. This option is only available with the PostScript driver.
Color-MFP Thick3 v1.1F Fiery/
Color-MFP Thick4 v1.1F Fiery/
Color-MFP OHP v1.1F Fiery/
Color-MFP Thin v1.1F Fiery/
Color-MFP Waterproof v1F Fiery
(Default set at Setup or with ColorWise Pro
Tools)

Paper Simulation	This option is only available with the Fiery Graphic Arts option.
On/Off

Pure Black Text/Graphics	The On setting optimizes the quality of black text and line art output (see
On/Off	page 1-8). This option is only available with the PostScript driver.
(Default set at Setup or with ColorWise Pro
Tools)

Rendering Style	Applies a GA-1121 color rendering dictionary (CRD) to RGB data (see
Photographic/Presentation/Relative	page 1-7), or to any incoming data with a PostScript source color space
Colorimetric/Absolute Colorimetric	definition, including CMYK. The rendering styles associated with the PCL
(Default set at Setup or with ColorWise Pro	driver do not match those associated with the PostScript driver.
Tools)

Image 19

Contents Toshiba GA-1121 About the Documentation Part Number Avis de Conformation Classe a de l’Industrie Canada Software License Agreement Limitation of Liability Contents Using Spot -On Viii Contents Using CalibratorUsing the EFI Spectrometer ES-1000 Using the EFI Densitometer ED-100Using the X-Rite DTP32 densitometer ContentsColor Setup Using the X-Rite DTP41 spectrophotometerPage About this manual IntroductionAbout this manual Xii Introduction Key features of ColorWiseXiii Key features of ColorWise Page Managing color on the GA-1121 Chapter GA-1121 Color Management11-1 Managing color on the GA-1121 RGB data Cmyk data Spot color data 11-2 GA-1121 Color ManagementGA-1121 color print option What it does 11-3 Managing color on the GA-1121Automatic/Off/On/Below 90-300 ppi Output profile is applied to all data in the print job see EFIRGB/sRGB PC 11-7 Managing color on the GA-1121 Rendering StyleOff Pure Black Text/Graphics11-8 GA-1121 Color Management Input Pure Black Text/Graphics11-9 Managing color on the GA-1121 Black Overprint11-10 GA-1121 Color Management Spot Color MatchingRGB Source Profile 11-12 GA-1121 Color Management Cmyk Simulation Profile11-13 Managing color on the GA-1121 Cmyk Simulation Method11-14 GA-1121 Color Management RGB SeparationCombine Separations Output profile11-15 Managing color on the GA-1121 Toner Reduction PostScript printer driver for Windows and Mac OS11-16 GA-1121 Color Management Click Update to display the current GA-1121 settings Setting color management print options for Windows11-17 PostScript printer driver for Windows and Mac OS 11-18 GA-1121 Color Management Adobe PostScript printer driver for Mac OS11-19 PostScript printer driver for Windows and Mac OS Setting color management print optionsChoose Color/Grayscale from the Print Color menu 11-20 GA-1121 Color ManagementPage 11-22 GA-1121 Color Management Print dialog box, choose Printer Features from the menu22-1 An overview of calibration ChapterUnderstanding calibration An overview of calibration22-2 Color Calibration 22-3 Understanding calibration How calibration works22-4 Color Calibration Scheduling calibration22-5 Using Calibrator Using CalibratorChecking calibration status Click Calibrator Starting Calibrator22-6 Color Calibration Start ColorWise Pro Tools and connect to the GA-112122-7 Using Calibrator Expert Mode22-8 Color Calibration 22-9 Using Calibrator Restoring default calibration measurementsSetting up the ES-1000 Using the EFI Spectrometer ES-1000Generate Measurement Page pane, click Print 22-11 Using the EFI Spectrometer ES-1000Calibrating the GA-1121 with the ES-1000 Start CalibratorCheck the settings, and click Measure Place the ES-1000 in the calibration cradle, and click OK 22-13 Using the EFI Spectrometer ES-1000Setting up the ED-100 Using the EFI Densitometer ED-100Calibrating the GA-1121 with the ED-100 22-15 Using the EFI Densitometer ED-100Choose the appropriate options, and then click Start 22-17 Using the EFI Densitometer ED-100 Repeat to measure each successive patch on the Measurement 22-18 Color Calibration22-19 Calibrating the GA-1121 with the DTP41 Calibrating the GA-1121 with the DTP41Choose the appropriate options, and click Print 22-20 Color Calibration Click Read Strip 22-22 Color Calibration Calibrating the GA-1121 with the DTP32Click Measure Using AutoCal and ColorCal 22-25 Using AutoCal and ColorCal 22-26 Color Calibration Calibrating from the Control Panel with AutoCal or ColorCal With Expert Mode, you can print a Comparison Page see When prompted, choose Yes to print the measurementOn the Control Panel, press Set To Remove Calibration from the Control Panel 33-1 Chapter ColorWise Pro Tools33-2 ColorWise Pro Tools Profile Manager33-3 Profile Manager Setting the default profilesStart ColorWise Pro Tools and click Profile Manager Start ColorWise Pro Tools and click the Profile Manager Downloading profiles33-4 ColorWise Pro Tools Repeat steps 2 through 4 for each type of profile33-5 Profile Manager Managing profiles Editing profiles33-6 ColorWise Pro Tools Defining profiles To Define a Custom Simulation Profile 33-9 Profile Manager 33-10 ColorWise Pro Tools Color Editor33-11 Color Editor Page Page 33-14 ColorWise Pro Tools Use the plus and minus buttons to adjust brightness33-15 Color Editor ColorWise Pro Tools Checking edited profiles Undoing Cmyk simulation editsClick Test Print from the Color Editor window Using Spot-OnStarting Spot-On 33-18 ColorWise Pro Tools33-19 Using Spot-On Using the Spot-On main window33-20 ColorWise Pro Tools Working with existing colors 33-21 Using Spot-OnEnter the name of the color you want to find and click OK Choose Find from the Edit menuNew color group entry or color entry appears as Untitled Creating custom colorsLocate and select the desired color group, and click Open Downloading custom color groupsUploading custom color groups 33-24 ColorWise Pro ToolsEditing color values 33-25 Using Spot-On33-26 ColorWise Pro Tools 33-27 Using Spot-On Click the center patch in the Spot-On Color Search window ColorWise Pro Tools Click OK to print the patchesSelect how you want to enter the Cmyk values 33-29 Using Spot-On Using a measurement instrument to target colorsChoose Start from the Instrument menu Saving changes and exiting Spot-On Setting default ColorWise options Color Setup33-31 Color Setup 33-32 ColorWise Pro Tools AA-1 Color Measurement Instruments Using the X-Rite DTP41 spectrophotometerSetting up the DTP41 Appendix a Color Measurement InstrumentsLED indicator Unused connector Connect to serial port Calibrating the DTP41 AA-5 Color Measurement Instruments Click Utilities AA-6 Color Measurement InstrumentsClick Calibrate DTP-41 Click Done Close the Utilities window Setting up the DTP32 Using the X-Rite DTP32 densitometerAA-8 Color Measurement Instruments Interface cable Calibrating the DTP32 AA-11 Color Measurement Instruments Page Simple Ascii Import File Format Saiff Appendix BBB-1 Importing density measurements Example of 1D Status T density for EFI 21 patch Example of 1D Status T density for EFI 34 patchBB-2 Importing density measurements BB-3 Importing density measurements Example of 1D Status T density for an arbitraryPage Index DTP41 IndexDTP41 2-19 to 2-22, A-1 to A-7 Index