Toshiba 791, 790 Save Original Packing Materials, Avoid Volatile Liquid, Moisture Condensation

Page 3

IMPORTANT PRECAUTIONS

CONTENTS

3

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory.

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will mar the finish.

In the spaces provided below, record the Model and Serial No. located at the bottom of your LCD projector.

Model No.

 

 

Serial No.

 

 

 

 

 

 

Retain this information for future reference.

Before use

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.

Exemption Clauses

Toshiba Corporation bears no responsibility in the case of damages arising from earthquakes, fire not liable to Toshiba Corporation, operating by third parties, other accidents, or use under abnormal conditions including erroneous or improper operation and other problems.

Toshiba Corporation bears no responsibility for incidental damages (lost profit, work interruption, corruption or loss of the memory contents, etc.) arising from the use of or the inability to use this unit.

Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the descriptions in this Owner’s Manual.

Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from combination with equipment or software that is not related to Toshiba Corporation.

Image 3
Contents TLP790 TLP790Only Canada Safety PrecautionsExemption Clauses Save Original Packing MaterialsAvoid Volatile Liquid Moisture CondensationPower Sources Source of LightVentilation Important Safety Instructions Stack Inhibited AccessoriesObject and Liquid Entry Do not place the product verticallyServicing Damage Requiring ServiceReplacement Parts Safety CheckDo not look into the arm light while it is lit Important Safety InstructionsDo not carry by the camera arm Do not move the projector while the arm is still erectEuro Power supply cord selectionContents Lens cover Zooming lever Air intake Names of each part on the main unitNames of each part on the main unit Top sideMenu button Input button Right side Names of each part on the remote control Attach the cover Install the batteriesLoading batteries Open the coverRemote control operation Front sideRear side Viewer Floor-mounted projector placementDetermine the screen size projected on the screen Top viewSide view Insert the other end into a wall outlet Connect the power cordLight Orange Power cord Supplied Take off the lens coverProjector placement angle adjustment Foot adjuster Foot adjuster release button Lift up LowerTurn clockwise to lift up Turn counterclockwise to lower Viewer Translucent screen Ceiling-mounted projector placementConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Computer Projector operation control by a computerHow to use the output connector Lamp lights and the start up display appears Remote controlProjection on the screen Press ON/STANDBYPress Enter Turn on the connected equipment and put it in playback modeSelect a desired language with Selection buttons / ,Select the input source by pressing Input RepeatedlyPress Input and hold for two seconds Zooming lever Adjust the picture size by turningFocusing ring Still picture is recommended for focusingPress VOL/ADJ +/- to adjust volume Press the + button to increase volumePress the button to decrease volume Press ON/STANDBY again Turning the power offPress ON/STANDBY after using the projector IndicatorsPress Auto SET Adjusting the picture automaticallyInput full screen video signals from the input Source computer and project the imageCorrecting the keystone distortion Press KeystoneConfirm the keystone distortion After confirming that V-keystone is selected on the menu Keystone adjustment finishesSound and picture are cut off temporarily Icon appears in the mute modeCutting off the picture and sound temporarily Press MutePicture freezes Icon appears in the freeze modeFreezing the picture Press FreezeIcon appears in the resize mode Enlarging the picture sizePress Resize Displaying PIP Sub-pictures Press PIPSub-picture is displayed Press Call Displaying InformationOperating a computer by the remote control Select the item with the selection Buttons Operating the menu screenPress Menu Press Menu once againPress Enter Adjust with VOL/ADJ +Select the item with selection buttons Enter Press EnterShutter Guide Menu adjustments and settingsTo operate Full MENU, refer to Full Menu adjustments and settings PictureFull Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Settings Adjustments Full Menu adjustments and settings DisplayFull Menu settings Default setting Reset all Full Menu settings ResetPIP menu setting Camera control panel Lights when the white balance is lockedTo turn on or off the overlay function To turn on or off the lightImagingDocument camera Preparation of the document imaging cameraPress ARM Light Set a document to be projectedCamera head over them Move the camera head to adjust the size of the picture Press Camera to select the camera input modeCamera in reverse Press Camera Gain +/- to improve view of aCamera subject which is too dark or vivid Follow the steps of Preparation of the document imagingOverlaying projection Screen Balance Press W.BALANCE to turn the Lock indicatorLocking the white balance Project a white paper and enlarge it to fillPaper or cloth Correcting illuminated defectsWith the document camera operating, fully Cover the camera lens with a piece of blackMain unit side IndicatorsTrouble indications Control panelUnplug the power cord Take off the air filter cover Air filter cleaningMount the air filter Clean the air filterCleaner’s nozzle Assemble the air filterReplacing the intake, exhaust fans and air filter Lens and main unit cleaningCleaning the lens Cleaning the main unitHandle to pull out the lamp Lamp replacementPull out the lamp CoverScrews Reset the lamp timerLoad a new lamp Attach the lamp coverSymptom Cause Correction Before calling service personalBefore calling service personal Mini D-sub 15pin Pin assignment of Computer in connectorConnector ConnectorTiming chart Applicable signalApplicable computer signal Signal Timing Horizontal Signal Timing VerticalApplicable signal Compatible Video and S-Video signalCompatible components video signal Y/PB/PR Controlling the projector by using RS-232C Signal assignment of RS-232C Interface formatCommand list Controlling the projector by using RS-232C VCL MO0 MS0 PIP Projection lens SpecificationsMain unit Liquid crystal displaySold separately SpecificationsAccessories Replacement lamp