Toshiba 790, 791 manual Important Safety Instructions, Do not carry by the camera arm

Page 8

IMPORTANT SAFETY INSTRUCTIONS (continued)

CONTENTS

8

21.Do not get your hands between the camera arm and the main unit when setting the camera arm back in its original position.

To avoid injury, be careful not to get your hands caught when setting the camera arm back in its original position. Families with children should be particularly careful.

22.Do not carry by the camera arm.

Do not carry the projector by the camera arm.

Doing so can result in damage or injury.

23.Do not leave documents on the unit for long periods of time while using the document imaging function.

Do not leave texts, papers or other documents for projection on the unit for long periods of time. The heat could erase the letters on a thermal paper.

24.Do not move the projector while the arm is still erect.

Always store the arm back in position when moving the projector. Otherwise injury or damage may result.

25.Do not look into the arm light while it is lit.

The strong light may cause damage to your eyes or sight.

Before use

Image 8

Contents TLP790 TLP790Safety Precautions Only CanadaSave Original Packing Materials Avoid Volatile LiquidMoisture Condensation Exemption ClausesVentilation Power SourcesSource of Light Important Safety Instructions Accessories Object and Liquid EntryDo not place the product vertically Stack InhibitedDamage Requiring Service Replacement PartsSafety Check ServicingImportant Safety Instructions Do not carry by the camera armDo not move the projector while the arm is still erect Do not look into the arm light while it is litPower supply cord selection EuroContents Names of each part on the main unit Lens cover Zooming lever Air intakeMenu button Input button Names of each part on the main unitTop side Right side Names of each part on the remote control Install the batteries Loading batteriesOpen the cover Attach the coverRear side Remote control operationFront side Floor-mounted projector placement ViewerSide view Determine the screen size projected on the screenTop view Connect the power cord Light Orange Power cord SuppliedTake off the lens cover Insert the other end into a wall outletTurn clockwise to lift up Turn counterclockwise to lower Projector placement angle adjustmentFoot adjuster Foot adjuster release button Lift up Lower Ceiling-mounted projector placement Viewer Translucent screenConnecting a computer Computer in 1 connector Connecting a computer Computer in 2 connector Connecting video equipment Connectionsand Projector operation control by a computer ComputerHow to use the output connector Remote control Projection on the screenPress ON/STANDBY Lamp lights and the start up display appearsTurn on the connected equipment and put it in playback mode Select a desired language withSelection buttons / , Press EnterPress Input and hold for two seconds Select the input source by pressing InputRepeatedly Adjust the picture size by turning Focusing ringStill picture is recommended for focusing Zooming leverPress the button to decrease volume Press VOL/ADJ +/- to adjust volumePress the + button to increase volume Turning the power off Press ON/STANDBY after using the projectorIndicators Press ON/STANDBY againAdjusting the picture automatically Input full screen video signals from the inputSource computer and project the image Press Auto SETConfirm the keystone distortion Correcting the keystone distortionPress Keystone Keystone adjustment finishes After confirming that V-keystone is selected on the menuIcon appears in the mute mode Cutting off the picture and sound temporarilyPress Mute Sound and picture are cut off temporarilyIcon appears in the freeze mode Freezing the picturePress Freeze Picture freezesPress Resize Icon appears in the resize modeEnlarging the picture size Sub-picture is displayed Displaying PIP Sub-picturesPress PIP Displaying Information Press CallOperating a computer by the remote control Operating the menu screen Press MenuPress Menu once again Select the item with the selection ButtonsAdjust with VOL/ADJ + Select the item with selection buttonsEnter Press Enter Press EnterGuide Menu adjustments and settings ShutterFull Menu adjustments and settings Picture To operate Full MENU, refer toFull Menu adjustments Position Full Menu adjustments Color Full Menu adjustments and settings Audio Full Menu adjustments and settings Display Settings AdjustmentsFull Menu settings Default setting Full Menu settings Reset Reset allPIP menu setting Lights when the white balance is locked To turn on or off the overlay functionTo turn on or off the light Camera control panelPreparation of the document imaging camera ImagingDocument cameraCamera head over them Press ARM LightSet a document to be projected Press Camera to select the camera input mode Move the camera head to adjust the size of the picturePress Camera Gain +/- to improve view of a Camera subject which is too dark or vividFollow the steps of Preparation of the document imaging Camera in reverseOverlaying projection Balance Press W.BALANCE to turn the Lock indicator Locking the white balanceProject a white paper and enlarge it to fill ScreenCorrecting illuminated defects With the document camera operating, fullyCover the camera lens with a piece of black Paper or clothIndicators Trouble indicationsControl panel Main unit sideAir filter cleaning Unplug the power cord Take off the air filter coverClean the air filter Cleaner’s nozzleAssemble the air filter Mount the air filterLens and main unit cleaning Cleaning the lensCleaning the main unit Replacing the intake, exhaust fans and air filterLamp replacement Pull out the lampCover Handle to pull out the lampReset the lamp timer Load a new lampAttach the lamp cover ScrewsBefore calling service personal Symptom Cause CorrectionBefore calling service personal Pin assignment of Computer in connector ConnectorConnector Mini D-sub 15pinApplicable signal Applicable computer signalSignal Timing Horizontal Signal Timing Vertical Timing chartCompatible components video signal Y/PB/PR Applicable signalCompatible Video and S-Video signal Command list Controlling the projector by using RS-232CSignal assignment of RS-232C Interface format Controlling the projector by using RS-232C VCL MO0 MS0 PIP Specifications Main unitLiquid crystal display Projection lensSpecifications AccessoriesReplacement lamp Sold separately