Using handy features, Resizing image | Toshiba TLPXC2500, X2500

Using handy features (Continued)

Adjusting Keystone distortion [Auto]

2Press the button.

The keystone distortion is automatically corrected. The icon appears during this correction.

When adjustment is finished, the Keystone menu appears again. For fine adjust-

ment, select [V-keystone] by the button and adjust image manually by the

buttons.

Adjusting Keystone distortion [Manual]

2Select [V-keystone] by the button.

3Use the buttons for keystone adjustment.

Note

•Depending on the amount of keystone adjustment and the content of images, some information may be lost, or the picture quality may suffer.

■Resizing image

The projected image can be resized (zoomed in/out).

Notes

•The icon appears while resizing.

•Operating a function other than Mute will release resizing.

•As zooming is processed digitally, the image quality is degraded in larger zoom ratio.

•During resizing or moving the zooming area, the image may be distorted.

■Cutting off the picture and sound temporarily (Mute)

When you want to project the images of another projector, overhead	Remote
projector, etc. temporarily, this projector’s images and sound can be	Control
turned off.

Press the remote control’s MUTE button.

The picture and sound are cut off. (The Mute function is released when pressing the MUTE button again.)

Notes

•	The		icon will appear while mute is in effect.
•	Operating any other functions will also cancel the muting.

1Press the remote control’s RESIZE button.

Each time you press the RESIZE button, zoom ratio is up. You can keep pressing.

2 To zoom out, press the remote control’s RESIZE		Remote
button.		Control
button.
Each time you press the RESIZE	button, zoom ratio is

down. You can keep pressing.

(However, the image cannot be smaller than the original size.)

3 To move the area to zoom in, use the buttons.

You can keep pressing.

4To reset the zoom, press the RETURN button.

The image is reset to the original size.

■Changing picture mode

The projected NCE mode can be selected.

Press the remote control’s NCE button.

1The NCE mode menu appears.

1/2/3

2Select a mode using then press .

Though the button is not pressed, the NCE mode changes as the setting is changed and the display turns off automatically in a few seconds.

Note

•[NCE mode] of the Image adjustment menu has the same function p.37 .

Remote Control

Toshiba TLPXC2500, X2500 owner manual Using handy features, Resizing image, Changing picture mode