Toshiba TLF-XD2000 owner manual Operations

Page 17

Using handy features (Continued)

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press the or

button.

2Select [Password setting] in the password registration, setting menu,

and press the or button.

3Select [On].

4Select [OK] and press the button.

The password entry screen is displayed.

5Enter the password using numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3Enter the password using numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode.

How to set password (from [On] to [Off])

1Select [Password] in the Default setting 2 menu and press the or

button.

The password entry screen is displayed.

2Enter the password using numeric keys of the remote control.

3Select [Password setting] in the password registration, setting menu,

and press the or button.

4Select [OFF].

5Select [OK] and press the button.

Note

•While the password setting is [On], the password entry screen will be displayed only when the power is turned on next time.

Operations

32

33

Image 17

Contents TLP-XD2000 Tested To Comply With FCC Standards Safety PrecautionsImportant Safety Instructions Important Safety Instructions Important Precautions Power Supply Cord SelectionPlace and Manner of Installation Save Original Packing MaterialsOther Cautions and Informations Remote Control BatteriesExemption Clauses Contents Names of each part on the main unit Checking the package contentsControl panel Control panel Remote ControlPicture button Name Main FunctionOperating the remote control Loading dry-cell batteries Into the remote controlRemove the battery cover Insert the dry-cell batteries Replace the battery coverPlacement Styles PlacementConnection Before connectionConnection Turning the power on and offBasic operations Turning the power on and offBasic operation Using handy featuresChanging picture mode Using handy featuresResizing image Cutting off the picture and sound temporarily MuteFreezing the image Freeze Setting the passwordChanging screen size Operations Image adjustment menu Using the menusHow to use the menus Display setting menu Using the menusDetailed description Screen size Description Computer Y/PB/PR Video S-videoPrecaution Blackboard modeReset logo Up/down shiftDefault setting 1 menu Default setting menuDefault setting 2 menu Power on Lamp powerAbout lamp When the lamp is brokenDisplaying Information Status display Description ComputerLamp replacement Lens and main unit cleaning Air filter cleaningTrouble indications Before calling service personnelList of general specifications SpecificationsList of supported signals RGB signals SpecificationList of supported signals Y/PB/PR signals SpecificationsList of supported signals Video, S-Video signals Separately sold product