Toshiba TLF-XD2000 owner manual Using the menus, How to use the menus, Image adjustment menu

on the control panel (main unit side) and remote control.

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.16

■How to use the menus

The menu shown below is for operation instructions purposes and might differ from the actual display.

■The image adjustment menu

Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.)

Item	Description	Computer Y/PB/PR Video S-video
Contrast	Adjust the image contrast.	Yes	Yes	Yes	Yes

1.Press the MENU button

2.Select a Category

Select a category by using . There are following 5 categories:

Image adjustment menu p.35

Display setting menu	p.37
Default setting 1 menu	p.40
Default setting 2 menu	p.41
Status display menu	p.42

Display the Setting display menu.

Displays the current adjustments and settings of selected category.

Item shown with gray cannot be adjusted with the current input source.

			Lower	Higher
	Brightness	Adjust the brightness of the image.			Yes	Yes	Yes	Yes
			Darker	Brighter
	Color	Adjust the color of the image.			No	Yes	Yes	Yes
		Lighter		Deeper
	Sharpness	Adjust the sharpness of the image.			Yes	Yes	Yes	Yes
			Softer	Sharper
	Noise	Set the function to reduce screen noise.			No	Yes	Yes	Yes
	reduction*1	On (Enable)		Off (Disable)
	Picture mode	Press	. Toggle the picture mode with		Yes	Yes	Yes	Yes
		.	1/2/3
/	R-level	Adjust red of the image color.			Yes	Yes	Yes	Yes
/

3.Adjustments & Settings Press or to open the menu.

				Item
			Adjustment/Setting Value						These marks
									signify that
									there are setting
									screens. Press
		These marks signify
									or	to
		the items can be			These marks				display a list of
		adjusted/set by using			signify that there				setting screens.
	.				are options.
					Press	or
					to display a list of
					options.
These marks signify the items can								* When no item is
								changed, press			.
be selected from the list by using
.
After an item is selected, apply it by					Toggle items with		.
pressing	.				Select items with			and press	.
					Fix selection with		.

•The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference.

•To return to previous item, press the RETURN button.

4. End Press the MENU button.

(The menu disappears about 30 seconds after the last operation.)

	Less red		More red
G-level	Adjust green of the image color.			Yes	Yes	Yes	Yes
	Less green		More green
B-level	Adjust blue of the image color.			Yes	Yes	Yes	Yes
	Less blue		More blue
NTSC mode*2	Set the black level with		.	No	No	Yes	Yes
	US	: NTSC (US) mode
	JAPAN	: NTSC (JAPAN) mode
Auto setting	Automatically adjusts items such as the			Yes	No	No	No
	samplingphase depending on the type of
	input signal.
Position	Press	then change mode using		Yes	No	No	No
	and adjust with		.
	Phase			Yes	No	No	No
	Adjust to eliminate flicker.
	Frequency			Yes	No	No	No
	Adjust to eliminate periodic patterns and
	flickering when many fine vertical lines
	appear on the screen.
	H-position			Yes	No	No	No

Adjust the horizontal position of the image.

Operations

34 35