Toshiba TDP-ET10 owner manual Save Original Packing Materials, Moisture Condensation

Page 9

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

Using

Plug

Line

confi guration Plug type

voltage

EURO

220 - 240V

UK

220 - 240V

Use a 5A fuse which is approved by ASTA or BSI to BSI362.

Always replace the fuse cover after changing the fuse.

Plug

Line

confi guration Plug type

voltage

Australian 220 - 240V 240V

10A

Switzerland 220 - 240V 240V

6A

North American 220 - 240V 240V

15A

Before

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to ship your projector. For maximum protection, repack the set as it was originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm loca- tion. When the unit is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.

Location and Installation

•Do not place in hot locations, such as near a heater or in direct sunlight. Doing so could cause malfunction, and shorten the life of the projector.

•Avoid locations with oil or cigarette smoke, which can affect the quality and useful like of the product optical parts and darken the screen.

•Do not use the product vertically in any upright position or slantwise in an angle of 20 degrees or more.

•Using this instrument near a TV or radio may cause interference to the images or sound. If this happens, move it away from the TV or radio.

•In a high altitude location where air is thin, cooling effi ciency is reduced so use it with the ambient temperature being lowered.

•The set of projector is hot after use. Handle with care.

•Do not use the projector while holding it in your hands or lap.

•Do not use the projector near a power source and the like, or in locations like a ship or vehicle that are subject to vibration or shock. Doing so may lead to a malfunction or shorten service life.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents TDP-ET20with built-in DVD player ProjectorSafety Precautions USA only Source of Light Power Sources VentilationPower-Cord Protection CleaningHeat Water and MoistureDo not place the product vertically Lightning stormsObject and Liquid Entry Stack InhibitedDamage Requiring Service AccessoriesCluding the lens and lamp ServicingSafety Check Replacement PartsLocation and Installation Save Original Packing MaterialsMoisture Condensation Avoid Volatile Liquid Important PrecautionsCopyrights DisposalTrademarks Notational Conventions Used in This ManualSurround Do not On Video CDs Contents Maintenance Checking the package contents Preparations Names of each part on the main unitControl panel and remote control parts for TDP-ET10 Control panel and remote control parts for TDP-ET20 For more information, see the pages in parentheses Terminal panelLoading dry-cell batteries into the remote control Preparing and using the remote controlPlacement Styles PlacementCm = projection size inches x 1.433 Projection Distance and SizeConnection Connecting with Video/S-Video/ComponentBefore connection Overview of cable typesConnecting with Computer Connecting with HdmiActivate the projector Turning the power on and offBlue on Press power switch to turn the power offBasic operations Turn on the powerActivate the connected device Select Menu languageProjector placement angle adjustments Adjusting the focusSelect a screen size aspect ratio Turning off the power Adjusting the volumePassword For Parental control Setup the DVD playerTDP-ET20 DVD playback AboutDivX VOD ParentalOSD Language PBC settingPlaying a disc Basic playback Menu LanguageTo pause playback still mode To start playback in the stop modeTo stop playback To remove the discPlaying in fast reverse or fast forward directions To pause playback still playbackLocating a chapter or track Random playback Repeat playbackChanging angles Title selectionChanging soundtrack language SubtitlesDisplay status Multimedia files on DVD/CD playback CD fi le system ISO9660 Level1, 2, or Joliet How to use the menus Using menusInput Menu Picture setting MenuSharpness ResetDetail enhancement PositionHdmi mode Ntsc modePhase Advanced Menu OverscanAudio setting Menu Setup Menu Status display Menu Version Total timeImmediately replace the lamp when a sign appears on Screen Lamp replacementWhen the lamp is broken About lampKeep the projector stationary Unplug power cord Wait until lamp is sufficiently cooledRemove the lamp cover Remove the lampReset the lamp timer Install the new lampLamp Environmental Safety Replace the lamp coverLens cleaning Lens and main unit cleaningMain unit cleaning Replacing cooling fansTrouble indications Indicator lights inform you of internal abnormalitiesBefore calling service personnel Not start For TDP-ET20 If This Happens Check Playback doesPlayback Picture has occaList of general specifications SpecificationList of supported signals Video, S-Video signals List of supported signals Y/Pb/Pr signalsControl terminal Contact your dealer for control cable and other commands

TDP-ET10 specifications

The Toshiba TDP-ET10 is a portable LCD projector designed to meet the needs of both professionals and educators who require a reliable and versatile presentation tool. This device stands out for its compact design and user-friendly features, making it an ideal choice for on-the-go presentations and small meeting environments.

One of the main features of the TDP-ET10 is its impressive brightness level, typically rated at around 2000 ANSI lumens, which ensures that presentations remain clear and vibrant even in less-than-ideal lighting conditions. This is particularly beneficial in classrooms or conference rooms where ambient light may interfere with visibility. The projector also boasts a high contrast ratio, which enhances image quality, allowing for crisp text and detailed graphics.

The TDP-ET10 employs advanced LCD technology, providing sharp images and accurate color reproduction. This technology is conducive for displaying a variety of content, from PowerPoint presentations to videos, ensuring that the visual experience remains engaging. The resolution is typically SVGA (800 x 600), which, while not the highest available, offers sufficient clarity for most business and educational applications.

Another significant characteristic of the TDP-ET10 is its connectivity options. It features a range of input ports, including VGA, composite, and S-video, allowing for easy connection to laptops, DVD players, and other multimedia devices. This versatility ensures that users can seamlessly integrate the projector into different setups without compatibility issues.

Portability is a hallmark of the TDP-ET10, with a light weight of approximately 2.2 kg and a compact design that makes it easy to transport. It also comes with an integrated carrying case, which provides additional protection during travel. The simple setup process contributes to its user-friendly nature, allowing users to start their presentations quickly without technical hassles.

In terms of longevity, the projector has a lamp life of around 2000 hours in standard mode, which can be extended significantly in eco mode. This feature not only reduces replacement costs but also minimizes downtime during critical presentations.

Overall, the Toshiba TDP-ET10 combines portability, image quality, and versatile connectivity, making it an excellent choice for professionals and educators who demand performance and convenience in their presentation tools.
Top Page Image Contents