Toshiba TDP-ET10 owner manual Projector placement angle adjustments, Adjusting the focus

Page 29

5Projector placement angle adjustments

(1)There are 4 adjustable feet on bottom of the projector.

Each foot height can be adjusted by screwing and the placement angle and the height of the projected image can be changed.

(2)To adjust the projection size, it is needed to change placement closer/farther to the projection screen.

6 Adjusting the focus

Use focusing ring to adjust the focus.

7Select a screen size (aspect ratio)

The aspect ratio is the ratio of image width to image height. HDTV and most DVD mov- ies are 16:9, which is the default for this projector. Most TV programs are 4:3.

The image ratio can be changed using the ‘SCREEN SIZE’ button on the remote control. (Screen size can also be selected in ‘PICTURE’ page in MENU system.) p.43 Select an aspect ratio to suit the format of the video signal. The following four aspect ratios are available.

(1)Full

Scales an image so that it is displayed in the full of the screen in 16:9 aspect ratio. This mode is best for squeeze-signal video images.

(2)4:3

Scales an image so that it is displayed in the center of the screen in 4:3 aspect ratio. This mode is best for 4:3-signal video images.

(3)Zoom

Enlarges an image with letterbox format to display it in full screen format in 16:9 aspect ratio. The upper and lower portions of the image are cropped. Use this setting for wide-screen video in letterbox format.

(4)Theater Wide®

A 4:3 aspect ratio image is enlarged NON-linearly in horizontal direction to accommodate 16:9 full-screen display. This stretches only the right and left sides of the image; the central part is unchanged. This mode is best for 4:3-signal video images displayed on a wide screen.

When input signal format is 1080i or 720p, actual screen size is fi xed to Full without regard to the screen size setting.

Operations

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents TDP-ET20with built-in DVD player ProjectorSafety Precautions USA only Source of Light Power Sources VentilationPower-Cord Protection CleaningHeat Water and MoistureDo not place the product vertically Lightning stormsObject and Liquid Entry Stack InhibitedDamage Requiring Service AccessoriesCluding the lens and lamp ServicingSafety Check Replacement PartsMoisture Condensation Location and InstallationSave Original Packing Materials Avoid Volatile Liquid Important PrecautionsCopyrights DisposalSurround TrademarksNotational Conventions Used in This Manual Do not On Video CDs Contents Maintenance Checking the package contents Preparations Names of each part on the main unitControl panel and remote control parts for TDP-ET10 Control panel and remote control parts for TDP-ET20 For more information, see the pages in parentheses Terminal panelLoading dry-cell batteries into the remote control Preparing and using the remote controlPlacement Styles PlacementCm = projection size inches x 1.433 Projection Distance and SizeConnection Connecting with Video/S-Video/ComponentBefore connection Overview of cable typesConnecting with Computer Connecting with HdmiActivate the projector Turning the power on and offBlue on Press power switch to turn the power offBasic operations Turn on the powerActivate the connected device Select Menu languageSelect a screen size aspect ratio Projector placement angle adjustmentsAdjusting the focus Turning off the power Adjusting the volumePassword For Parental control Setup the DVD playerTDP-ET20 DVD playback AboutDivX VOD ParentalOSD Language PBC settingPlaying a disc Basic playback Menu LanguageTo pause playback still mode To start playback in the stop modeTo stop playback To remove the discLocating a chapter or track Playing in fast reverse or fast forward directionsTo pause playback still playback Random playback Repeat playbackChanging angles Title selectionDisplay status Changing soundtrack languageSubtitles Multimedia files on DVD/CD playback CD fi le system ISO9660 Level1, 2, or Joliet How to use the menus Using menusInput Menu Picture setting MenuSharpness ResetDetail enhancement PositionHdmi mode Ntsc modePhase Advanced Menu OverscanAudio setting Menu Setup Menu Status display Menu Version Total timeImmediately replace the lamp when a sign appears on Screen Lamp replacementWhen the lamp is broken About lampKeep the projector stationary Unplug power cord Wait until lamp is sufficiently cooledRemove the lamp cover Remove the lampReset the lamp timer Install the new lampLamp Environmental Safety Replace the lamp coverLens cleaning Lens and main unit cleaningMain unit cleaning Replacing cooling fansTrouble indications Indicator lights inform you of internal abnormalitiesBefore calling service personnel Not start For TDP-ET20 If This Happens Check Playback doesPlayback Picture has occaList of general specifications SpecificationList of supported signals Video, S-Video signals List of supported signals Y/Pb/Pr signalsControl terminal Contact your dealer for control cable and other commands

TDP-ET10 specifications

The Toshiba TDP-ET10 is a portable LCD projector designed to meet the needs of both professionals and educators who require a reliable and versatile presentation tool. This device stands out for its compact design and user-friendly features, making it an ideal choice for on-the-go presentations and small meeting environments.

One of the main features of the TDP-ET10 is its impressive brightness level, typically rated at around 2000 ANSI lumens, which ensures that presentations remain clear and vibrant even in less-than-ideal lighting conditions. This is particularly beneficial in classrooms or conference rooms where ambient light may interfere with visibility. The projector also boasts a high contrast ratio, which enhances image quality, allowing for crisp text and detailed graphics.

The TDP-ET10 employs advanced LCD technology, providing sharp images and accurate color reproduction. This technology is conducive for displaying a variety of content, from PowerPoint presentations to videos, ensuring that the visual experience remains engaging. The resolution is typically SVGA (800 x 600), which, while not the highest available, offers sufficient clarity for most business and educational applications.

Another significant characteristic of the TDP-ET10 is its connectivity options. It features a range of input ports, including VGA, composite, and S-video, allowing for easy connection to laptops, DVD players, and other multimedia devices. This versatility ensures that users can seamlessly integrate the projector into different setups without compatibility issues.

Portability is a hallmark of the TDP-ET10, with a light weight of approximately 2.2 kg and a compact design that makes it easy to transport. It also comes with an integrated carrying case, which provides additional protection during travel. The simple setup process contributes to its user-friendly nature, allowing users to start their presentations quickly without technical hassles.

In terms of longevity, the projector has a lamp life of around 2000 hours in standard mode, which can be extended significantly in eco mode. This feature not only reduces replacement costs but also minimizes downtime during critical presentations.

Overall, the Toshiba TDP-ET10 combines portability, image quality, and versatile connectivity, making it an excellent choice for professionals and educators who demand performance and convenience in their presentation tools.
Top Page Image Contents