ProScan Guide to Connecting CRT TV Speakers for Televisions

CONNECTINGEXTERNAL SPEAKERS

You can connect up to six additional speakers to the TV: two to the FRONT SPEAKERSterminals, two to the CENTER SPEAKERS,and two to the REARSPEAKERSterminals.

Front (Main) Speakers

lb connect external front speakers:

1.Connect speakers to the MAIN speaker terminals.

2.Set the SPEAKERSWITCH to EXTERNAL.

--main

--surround

Center Speakers

To connect external center channel speakers:

1.Connect speakers to the CENTER CHANNEL terminals.

2.Set the SPEAKERSWITCH to EXTERNAL.

Rear Speakers

to connect rear speakers for surround sound effects.

1.Connect two speakers to the SURROUND terminals.

2.Position them behind you in your TV room. To improve the surround sound effect, you may prefer to set or mount the speakers several feet off the ground.

Connecting Speakers to the TV

1.If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire core.

2.Pressdown and hold the lever on the speaker terminal.

3.Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).

4.Release the lever. Pull gently on the wire to see that it'sconnected securely.

Connecting a Subwoofer

To connect a subwoofer to the TV:

•Connect the subwoofer's audio input to the left (L/MONO) TV TUNER OUTPUT jack.

IMPORTANT

When connecting the speaker wire, make sure you connect the positive

(+)terminal on theTV to the positive

(+)terminal on the speaker. One side of the speaker wire is usually marked

with a white stripe to help you match up the terminals correctly. If the (+) and (-) terminals are not matched properly, the speakers will not be "in

phase" causing reduction in bass frequencies.

Do not allow the wire core to touch other wires or terminals. Damage to components could result if the cores of two wires touch each other.

71