Using the Remote to Control a Component
Once the remote has been programmed with the correct codes, you're
ready to use it to control your component.
To operate the component using the remote:
1. Pressthe component button (lW, VCR, DVDoVCR, SAToCABLE,
AUDIO, etc.) to set the remote to control that component.
:2. Press POWER to turn the device off or on.
3. Use the remote buttons that apply to that device (CHAN buttons,
transport keys, etc.).
Tip for the Simple Remote:
To change channels on theVCR, press
and holdVCR, then pressTV. Release
both and use the CHAN buttons to
change channels. To return to using
the simple remote buttons as trans-
port keys, press VCR.
For PROSCAN, RCA, and GE devices,
pressing the device button should
turn the device on. Use the POWER
button to turn the device off.
3O