ProScan CRT Television manual Set DVD*VCR Channel, Set SAT-CABLE Channel, Eli

Set DVD*VCR Channel

Lets you select the channel that the TV tunes to when you press the DVD-VCR button. The choices are the same as those listed under Set VCR I Channel, except that the component is the second VCR or laserdisc player, and the remote button being programmed is DVD;VCR. For example:

Video 2 Input Choose this if your second VCR or laserdisc player is connected to the Video 2 jacks on the back of the TV and you want the TV to tune to Video 2 input when you press the DVD-VCR button. This is a typical setting for a second VCR or laserdisc player.

Set SAT-CABLE Channel

Lets you select the channel that the TV tunes to when you press the SAT-CABLE button. Usually, SAT-CABLE can control either a satellite receiver connected to the Video 1 input jacks or a cable box connected to the Antenna A jack.

The choices are the same as those listed under Set VCR 1 Channel, and include Channel 2 Antenna A and Channel 2 Antenna B. Also, the component is either a satellite receiver or a cable box, and the button being programmed is SAT.CABLE. For example:

Video 1 Input Choose this if your satellite receiver is connected to the Video 1 jacks on the back of the TV and you want the TV to tune to Video 1 input when you press the SAT-CABLEbutton. This is the typical setting for a satellite.

The following is an example for a cable box:

Ch 3 Antenna A Choose this if your cable box is connected to the Antenna A jack on the back of the TV and you want the TV to tune to channel 3 when you press the SAT,CABLE button. This is a typical setting for a cable box.

PorentolControl

Eli

48