THINGS TO KNOW BEFORE
":ONNECTING COMPONENTS
Protect your components from power surges
• Connect all components before plugging any power cords into the wall outlet.
• Alway s turn offtheTV andlor component before you connect or disconnect any cables.
POSITION CABLES CORRECTLY TO
AVOID AUDIO HUM OR INTERFERENCE
Insert all cable plugs firmly into their jacks.
Place the audio/video cables to the sides of theTV's back panel instead of straight down the middle after you connect your components.
Try not to coil any
them away from the audio/video cables as much as possible.
Make sure all antennas and cables are
properly grounded. Refer to the SafetyTips sheet packed with your TV.
PROTECT YOUR COMPONENTS
FROM OVERHEATING
Do not block ventilation holes in any of the
components. Arrange the components so tlhat air can circulate freely.
Do not stack components.
Allow adequate ventilation when placing
your components in a stand.
Place an amplifier on the top shelf of the stand so heated air rising from it will not flow around other components.
CONNECT AUDIO/VIDEO CABLES FOR
BEST RESULTS
