ProScan CRT Television manual Satellite Receiver Codes

Programming the Universal Remote to Control a ProScan,

RCA, or GE Brand DSS ® Receiver

The universal remote is preprogrammed to control a ProScan, RCA, or GE brand DSS® receiver. Follow the instructions below for basic operation of the receiver. You may want to experiment with other buttons on the remote to see if they work with your receiver.

Programming the Universal Remote to Control a Satellite Receiver

Pefer to the Connection Foldout or contact your satellite company to hook up your satellite receiver. If you have a satellite box with its own remote, you also may be able to use the TV'sremote with your satellite receiver. Use the codes in the code list on the right or on the sheet packed with your remote. However, this remote may not operate all models of the brands that are shown in the code list.

1.Turn on the satellite receiver.

2.Look up your brand and its code number(s) on the code list at the right.

3.Pressand hold the SAT.CABLE button on the remote.

4.Enter the two-digit code from the code list.

5.Release SAT.CABLE, then press POWER to see if the satellite receiver responds to the remote commands.

6.Repeat steps 3 through 5 using the next code listed for your brand until the satellite receiver responds to the remote commands.

DSS® is a registered trademark of DirecTV Inc., a unit of GM Hughes Electronics Corporation

oll

Satellite Receiver Codes

Chaparral	080,08 I
Cheyenne	08 I
Drake	082,083
General Instruments	092,093,094
Realistic	084
Sierra I,I1,111	08 I
STSI	085
STS2	086
STS3	087
STS4	088
Toshiba	089
Uniden	090
Video Cipher II	091

24