CONNECTINGAUDIO COMPONENTS

Connecting a stereo amplifier

1.Connect the amplifier's TV audio inputs to the left (L/MONO) and right (R) TV TUNER OUTPUT jacks.

2.You may prefer to turn off the TV'sinternal speakers by selecting a speaker configuration with external speakers from the

Audio menu.

If your audio amplifier is part of a system that uses its own remote control, you may prefer to connect it to the TV using the Fixed Output jacks.

Important: Do not use the amplifier's PHONO inputs. If the amplifier is not stereo, use the L/MONO IV TUNER OUTPUT jack. Consult the amplifier's owner's nnanual for the manufacturer's recommended hookup.

Connecting a tape deck

1"o use a tape deck to record audio from TV:

1.Connect the tape deck's audio inputs to the FIXED OUTPUT jacks on the back of the TV.

OUTPUT

I

IXED

1

Tape Deck Connection

The FIXED OUTPUT jacks provide a fixed level audio signal, making them ideal for audio recording, or for use with an audio amplifier that has its own remote control. No matter how the volume changes on theTV, the output volume stays the same.

7:2

Page 74
Image 74
ProScan CRT Television manual Connectingaudio Components, Connecting a stereo amplifier