Setting Up Your Monitor: Dell™ 1707FPV Flat Panel Monitor User's Guide
1.Turn off your computer and disconnect the power cable.
2.Connect either the white DVI or blue VGA cables to the connectors on the computer and the monitor.
3.Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the computer and the monitor, you can use the USB connectors on the monitor.
4.Connect any USB devices.
5.Connect the power cables.
6.Turn on your monitor and computer. If you do not see an image, push the input select button and ensure the correct input source is selected. If you still do not see an image, see Troubleshooting your monitor.
Using the Front Panel
Use the buttons on the front of the monitor to adjust the image settings.
The Menu button is used to open and exit the
file:///T/htdocs/monitors/1707FPV/en/setup.htm[9/12/2012 5:23:33 PM]
