Toshiba TLP-T50M Control terminal, Separately Sold Product, Pin assignment, Interface format

■CONTROL terminal

●Pin assignment

1 2

4

3 5

68

7

Mini DIN 8 pin connector

●Interface format

1 Communication method

2 Communication format

3 Data format

4 Replies

Pin No.	Signal Name	Description
1	RXD	Receiving data
2	CTS	Consent to send
3	DSR	Data set ready
4	GND	Signal ground
5	RTS	Request to send
6	N.C	No connection
7	TXD	Sending data
8	N.C	No connection

RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length: 1 bit

STX (02h) Command (3Byte) ETX (03h)

Only 1 command valid per communication.

For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported.

Acknowledge ACK (06h) No acknowledge NAK (15h)

If commands are to be sent consecutively, wait for the response from the projector (ACK or NAK) before sending the next command.

● Main Commands

Item	Command
Power on	PON
Power off	POF
OSD display on	MO0
OSD display off	MO1
Auto setting (RGB input)	PAT
Status display on	DON
Status display off	DOF

Item	Command
Computer input select	IN1
Y/PB/PR input select	IN2
Video input select	IN5
S-video input select	IN6

Note

• Contact your dealer for control cable and other commands.

■Separately Sold Product

Replacement Lamp Model TLPLV1

Note

• Design, specifications, etc. subject to change without notice for improvements, etc.

Others

38 39