Toshiba TLP-T72 owner manual Lens and main unit cleaning, Lamp replacement

Page 30

Lens and main unit cleaning

■ Lens cleaning

• Clean the lens with a commercially available blower and/or lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects, or strike it.

■Main unit cleaning

•Clean the main unit after unplugging the power cord.

3Remove the lamp cover.

Loosen the screws, then pull up to direction of the arrow with your fingers on the area shown in the figure to remove the lamp cover. Be careful to avoid breaking a nail or otherwise injuring your fingers when doing so. (If the screws are too tight to remove the lamp cover, use any tool.)

3

1

2

Lamp cover

• Wipe dirt off the main unit gently with a soft cloth.

• If the soiling is severe, dip the cloth in a neutral detergent diluted in water, wring well, and gently wipe off the dirt, then finish up by wiping with a dry cloth.

●Replacing air intake and exhaust fans, and air filter

To maintain the performance, it is recommended that these should be replaced about every 2 to 3 years. Consult with your dealer for details.

Lamp replacement

A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on conditions of use.) If this happens, replace it with a new one.

CAUTION

•Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership.

•When replacing, always use lamp “TLPLW2” (sold separately).

•If you have been using the projector, the lamp will be very hot, and may cause burn injuries.

Wait for the lamp to cool (for longer than 1 hour) before replacing it.

•If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service.

1Unplug power cord.

2Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

4

Pull out the lamp.

4

1

 

2

 

Loosen the 2 screws holding the lamp in place,

 

 

 

and pull on the handle to remove the lamp.

 

 

5

Mount the new lamp.

 

 

 

Align the orientation, press down until the bottom is

 

 

 

reached, and lock in place using the two lamp

 

 

 

locking screws.

5

2

 

 

 

6

Replace the lamp cover.

 

1

 

 

Align the cover, and press it in, then screw in the screws loosened in step 3 until the lamp cover is no longer loose.

7Reset the lamp timer.

See the lamp’s manual for instructions on resetting the lamp timer.

Notes and Precautions

•Press thebutton twice to display (a rough guide) of the time of use from the Lamp time item on the Status display menu. p.32

•As a rule of thumb, it is recommended that the lamp should be replaced after 1,500 hours of use. When Lamp time reaches 1,500 hours, the icon and a message will appear. When any operation is performed, the message disappears.

•Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the lamp may fail to come on p.65 , and the lamp’s lifetime may be shortened.

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose it in accordance with local regulations.

Maintenance

58

59

Page 29 Page 31
Image 30
Page 29 Page 31
Contents TLP-T720 TLP-T721 TLP-T620 TLP-T621 TLP-T520 TLP-T521 Ventilation Power SourcesSource of Light USA onlyImportant Safety Instructions When using a wireless LAN PC card Models Damage Requiring ServiceReplacement Parts Safety CheckSave Original Packing Materials Place and Manner of InstallationPlug Configuration Plug type Line voltage Moisture CondensationCopyrights Important Precautions Avoid Volatile LiquidLCD Panel DisposalContents Checking the package contents Names of each part on the main unitRear Models equipped with PC card slotDamage may result Replace the battery cover Loading dry-cell batteries Into the remote controlRemove the battery cover Insert the dry-cell batteriesSwitching operation modes PlacementPreparing and using the remote control Placement StylesHow to use the PC card slot ConnectionInstalling the applications Turning the power on and offBasic operations Using handy features Basic operationsUsing handy features Enlarging the picture size ResizeCutting off the picture and sound temporarily Mute Displaying Information Status display Using the wireless LAN PC cardCommunication mode FunctionsComputer settings Projector settingsInstalling the applications PreparationDisplaying a computer’s screen via the projector Click on the File icon Click on the Remote Control ButtonOperating the projector Click on the Browse button, and select the file to sendMemory PC cards Jpeg files Projecting images stored in a memory PC cardPreparation of the document camera Using the document cameraSet up document to be photographed Image projection with the document cameraUsing the document camera Using the overlay functionLocking the white balance Preparing the computer and projector Press the W.BALANCE button. The Lock indicator lights. LitCorrecting illuminated defects Operating the computerImage button Mount a memory PC card into the PC card slot p.23Display the camera image, and press the Store Press the buttons to save the imageHow to use the menus Using the menusConnecting a computer Operating a computerDefault setting menu Using the menusImage adjustment menus Display setting menuAir filter cleaning Lens and main unit cleaning Lamp replacementHow to use the supplied software How to use the Projector Configuration ToolConverting files created with Microsoft PowerPoint How to use the supplied softwareHow to use the Jpeg Conversion Tool Launching the Jpeg Conversion ToolTrouble indications No powerPower went out during use, or power won’t come on Making a presentation with converted Jpeg filesBefore calling service personnel List of supported signals RGB signals SpecificationsList of general specifications SpecificationSpecifications

TLP-T72 specifications

The Toshiba TLP-T72 is a state-of-the-art thermal transfer printer designed to meet the demanding needs of various industries, including healthcare, retail, and manufacturing. This printer is renowned for its reliability, efficiency, and high-quality output, making it a popular choice for businesses looking to enhance their label printing capabilities.

One of the standout features of the TLP-T72 is its advanced thermal transfer technology. This technology utilizes a heated print head and a ribbon to transfer ink onto various label materials, providing sharp graphics and clear text. The transfer method not only improves the durability of printed labels but also ensures resistance to smudging and fading, making it ideal for long-term use.

The printer is equipped with a high-resolution print head, capable of producing stunning print quality at resolutions up to 300 dpi. This means users can create intricate designs, barcodes, and images that are easily readable and visually appealing. With a print speed of up to 6 inches per second, the TLP-T72 can efficiently handle high-volume printing tasks without compromising quality.

In terms of connectivity, the TLP-T72 offers a range of options, including USB, Serial, and Ethernet interfaces, allowing for seamless integration into existing systems. This flexibility makes it suitable for diverse operational environments, ensuring that users can easily connect and manage the printer through various channels.

Another notable feature of the TLP-T72 is its user-friendly design. The printer comes with an easy-to-navigate control panel, which simplifies operation and minimizes the learning curve for new users. Additionally, the printer supports various label formats and sizes, making it versatile for different applications ranging from shipping labels to product tags.

The TLP-T72 also supports a range of software solutions, enhancing its functionality and offering users the ability to create custom labels tailored to their specific needs. This adaptability is further complemented by its ability to handle both direct thermal and thermal transfer printing, providing users with options depending on their requirements.

In summary, the Toshiba TLP-T72 combines advanced thermal transfer technology, high print quality, and versatile connectivity, making it an essential tool for any business looking to streamline its labeling process. Its user-friendly design and robust performance characteristics reinforce its status as a reliable choice in the competitive landscape of label printers.
Top Page Image Contents