Toshiba TLP-X4100E Remote Control Unit, Does not work, Wireless Mouse, Function does not, Work

APPENDIX

Problem:	Try these Solutions
Remote Control Unit	● Check batteries.
does not work.	● Check ALL-OFF switch on Remote Control Unit is set to “ON”.
	● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit.
	● Make sure you are not too far from a projector when using Remote Control Unit.
	Maximum operating range is 16.4’ (5m).
	● Check transmitted signal mode from Remote Control Unit.
	(See“SETTING” section on page 38.)
Wireless Mouse	● Check cable connection between a projector and your computer.
function does not	● Check mouse setting on your computer.
	● Turn a projector on before turning on a computer.
work.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

The CE Mark is a Directive conformity mark of the European Community (EC).

43