Toshiba MP7630 manual Operation, Startup

Operation

Startup

1

✓Note: Make all cable connections and line hookups with the

power off.

Power

2

Standby/ON

Standby/On

Standby/On

Standby/On

1.Plug power cord into wall socket.

2.Press the STANDBY/ON button

•The ON indicator blinks green and then stays green.

•The ON indicator will blink green during warm-up and lamp ignition.

(When power is turned off, there is a 90-second reset period before the STANDBY/ON button will function again.)

3. Turn on all connected equipment.

✓ Note: If you have the Optional Video Module attached to the unit, press the Source button on the remote to select the source of the signal to be projected onto the screen. The selected signal input is displayed at the top right of the screen. The display will show the last selected input source before power was turned off. (For more information, please refer to the Optional Video Module section of this manual.)

16

3M™ Multimedia Projector MP7630 © 3M IPC 2000