Troubleshooting
Status Indicator Lights and Messages
Message Displayed | Meaning (and Solution, if applicable) | |
|
| |
SEARCHING | Projector cannot identify input signal. | |
|
| |
INPUT SIGNAL DETECTED, | Projector has identified input signal. | |
ACTIVATING AUTO IMAGE | ||
| ||
|
| |
SYNC IS OUT OF RANGE | The input signal's horizontal frequency exceeds the range of the | |
projector's. | ||
| ||
|
| |
CHANGE THE LAMP AND | The lamp has been operated for over 1200 hours and needs to be | |
RESET THE LAMP TIMER | replaced soon. | |
|
| |
CHANGE THE LAMP, | The lamp has been operated for 1479 hours and the power will shut off | |
THE POWER WILL TURN OFF | ||
after 20 more hours. Replace the lamp as soon as possible. | ||
AFTER 20 HOURS. | ||
| ||
|
| |
CHANGE THE LAMP! | The lamp has been operated for over 1500 hours. Power will | |
(blinking, with LED lighting red) | automatically shut off in 10 minutes. Replace the lamp immediately. | |
|
|
© 3M IPC 2000 | 3M™ Multimedia Projector MP7630 |
33