Toshiba B-EP2DL, B-EP4DL owner manual

Page 6

WARNING

This indicates that there is the risk of death or serious injury if the machines are handled improperly or contrary to this indication.

•If water or any other liquid enters the machine, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock.

•If the enclosure is damaged when dropped or subject to shock, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock.

•Avoid continuous exposure to direct sunlight or high temperature as this may cause fire.

•Do not remove covers or modify the machine by yourself. Doing so may cause fire or electric shock.

•Avoid water, operation with wet hands or cleaning with a moistened cloth. Failure to do this may cause fire or electric shock.

•Do not wipe the machine with a cloth moistened with thinner or other volatile solvent as this may cause fire or electric shock.

•Use the specified battery only. Failure to do this may cause fire or electric shock.

•Danger of explosion if the battery is incorrectly replaced. Replace the battery only with TOSHIBA TEC Corporation, Battery Pack Model B-EP802-BT-QM-R 7.4V 2600mAh Li-ion or B-EP804-BT-QM-R 14.8V 2600mAh Li-ion. Discard used batteries according to the manufacturer's instruction.

•Do not disassemble and modify the battery because it has a protection unit in it. Doing so may break the protection unit, causing the battery to heat up, burst or burn.

•If the battery gets wet, dry it completely. Using a wet battery may cause fire or electric shock.

•Be aware of the following precautions when using batteries. Otherwise they could heat up, burst or burn.

„Do not throw the battery into fire or heat it with a microwave or oven, etc.

„Do not load the battery with the electrodes reversed.

„Do not connect the electrodes with metal objects like wire. Do not carry or store the battery along with metal objects such as necklaces, hairpins, etc.

„Do not stick a needle into, hammer, step on, or drop the battery.

„Do not solder the battery.

„Do not leave the battery where the temperature is more than 60°centigrade, such as inside a car or in direct sunlight.

CAUTION

This indicates that there is the risk of personal injury or damage to objects if the machines are improperly handled contrary to this indication.

•Keep away from flame or other sources of heat. Failure to do this may cause fire or machine failure.

•Do not drop or shock the machine as this may cause machine failure.

•During lightning, turn off and keep away from the machine because of danger of electric shock and machine failure.

•Avoid locations subject to rapid change in temperature as this causes condensation, causing electric shock or machine failure.

•Do not damage the print head, platen or strip roller with a sharp object. Doing so may cause machine failure.

•Do not touch or contact the print head element with a metal object. Doing so may cause machine failure.

•Use the specified media only. Failure to do this may cause machine failure.

•Be sure to turn off the machine before replacing the battery, or machine failure may occur.

•Do not charge the battery near flame or under direct sunlight. High temperature may activate or damage the protection unit of the battery, disabling the electric charge or causing it to overheat, burst, or burn.

•Unload the battery when the machine will not be used for a longtime. Failure to do this may cause machine failure.

•Keep the battery away from flame, a heat source or other locations subject to high temperature. Failure to do this may cause it to over heat or burn.

•Use the specified battery charger only. Failure to do this may cause the battery to overheat, burst or burn.

•Do not force the battery into the machine or battery charger. Doing so may cause the battery to overheat, burst or burn. Check for the correct electrode.

•Do not connect the battery to a power outlet or a car cigarette lighter jack as this may cause the battery to overheat, burst or burn.

•Because the B-EP802-BT-QM-R and the B-EP804-BT-QM-R Series battery is exclusively for the B-EP2DL and the B-EP4DL Series printer, respectively, do not use the battery in other machines. Doing so may damage the battery or affect the performance and life of the battery.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents EP2D/EP4D Series Vorsicht N258 For USA TEC-BTM-R Specification Page Part Names EP2DL SeriesEP4DL Series Operation Panel Functions Function/UsageName/Icon Loading a battery pack How to turn on the printerHow to turn off the printer Removing a battery pack Charging the Battery Pack with an Optional AdapterLoading the Media Before using a peel-off unit „ How to put back the Peel-off RollerHow to attach the accessories „ Belt Clip„ Shoulder Strap Option „ Carry case Option CARE/HANDLING of the Media Data Transmission „ IrDASupplement „ Wireless GH30/GH40 model only „ Serial RS-232C GH20 model only„ Peel-off roller Daily maintenance„ Print head „ Platen„ Media Guide Roller and Strip Shaft „ Media Sensor Window and Media Path„ Top Cover, Operation panel, and IrDA Window Troubleshooting If an error message is displayedWhen the printer does not operate properly LAN Printer Specification EP2DL-GH20-QM-R EP2DL-GH30-QM-R EP2DL-GH40-QM-REP4DL-R Series English FranaçisDeutsch Español NederlandsItaliano Português Polski
Related manuals
Manual 30 pages 61.77 Kb Manual 27 pages 13.43 Kb

B-EP2DL, B-EP4DL specifications

The Toshiba B-EP4DL is a compact and efficient thermal transfer label printer that offers exceptional performance and versatility for various labeling needs. Designed for high-volume applications, this printer is ideal for retail, logistics, and manufacturing environments where durability and reliability are essential.

One of the standout features of the B-EP4DL is its robust design, which allows it to withstand the rigors of demanding work environments. Its compact size makes it easy to integrate into existing workflows, and it can be easily mounted on shelves or vehicles, making it a mobile solution for on-the-go printing needs. The printer's lightweight structure and ergonomic design ensure that it can be operated comfortably in various positions.

The B-EP4DL employs advanced thermal transfer printing technology, ensuring high-quality and precise label printing at fast speeds. It supports a maximum resolution of up to 203 dpi and can print up to 4 inches per second. This high speed and resolution make it suitable for producing clear and scannable barcodes, text, and graphics, which is essential for inventory management and shipping processes.

Another key characteristic of the B-EP4DL is its connectivity options. The printer supports multiple connectivity interfaces, including USB, Bluetooth, and Ethernet, allowing for seamless integration into any network infrastructure. This flexibility means that users can easily connect the printer to desktop computers, mobile devices, or other peripherals, enhancing productivity and workflow efficiency.

Additionally, the B-EP4DL is designed with user-friendliness in mind. Its simple and intuitive operation, along with easy access to the printer mechanisms, simplifies maintenance and reduces downtime. The printer is equipped with an LCD display that provides real-time status updates and alerts, enabling users to monitor printing processes effectively.

Power efficiency is another important aspect of the B-EP4DL. It is designed to consume less energy while delivering high-performance output, making it not only cost-effective but also environmentally friendly. Furthermore, the printer’s long-lasting components and minimal maintenance requirements contribute to a lower total cost of ownership.

Overall, the Toshiba B-EP4DL stands out as a reliable, feature-rich printer that meets the demands of modern labeling applications. Its combination of durability, speed, connectivity, and user-friendly design makes it a preferred choice in various industries where efficiency and high-quality output are critical.
Top Page Image Contents