Frequently Asked Questions & Troubleshooting

Frequently Asked Questions

How do I clean my subwoofer?

Use a dust free cloth or a soft brush to clean your subwoofer. We recommend a specialty cloth (available through the Xtatic shop at www.martinlogan.com) that cleans better than anything else we have tried.

Is it safe to set things on my subwoofer?

While your Dynamo 1000 is designed with a durable, stain- resistant surface, we advise you not to set anything on your Dynamo 1000—especially containers holding liquids.

Is there likely to be any interaction between my subwoofer and the television in my Audio/ Video system?

Yes. The Dynamo 1000 subwoofer doesn’t use a shield- ed driver. We recommend 3 feet between the Dynamo 1000 subwoofer and video components that are suscep- tible to magnetic fields..

Is there likely to be any interaction between my subwoofer and other electrical devices in my house?

Yes. When operating wirelessly this subwoofer may be susceptible to RF interference in the 2.4GHz bandwidth from microwave ovens and wireless devices such as WiFi systems, video game consoles, cordless telephones, blue tooth devices, and baby monitors. Generally, this issue (popping noises) is easily resolved by physically separat- ing problematic devices from one another—a distance as little as two feet will often alleviate the interference. In the case of microwave ovens, the interference will only occur when the microwave is operating.

Will my electric bill go 'sky high' by leaving my subwoofer plugged in all the time?

No. The Dynamo 1000, when the power switch is set to ‘Auto On’, will draw about 15 watts when idle and only 1 watts in standby mode.

Should I unplug my subwoofer during a thun- derstorm?

Yes, or before. It's a good idea to disconnect all of your audio/video components during stormy weather.

Troubleshooting

No Output

•Check that all your system components are turned on.

•Check that the master power switch adjacent to the AC receptacle is set to 'Auto On'.

•Check your wires and connections.

•Check all interconnecting cables.

•Make sure the level control is not turned down.

•Turn off and unplug the Dynamo 1000 and check the fuse near the AC power cord receptacle on the back. If the fuse has blown, replace the bad fuse with a matching T 5A L 250V fuse (T 2.5A L 250V if you are in a region using 230V).

•If the problem persists, contact your dealer.

Muddy Bass

•Check placement. Try moving the subwoofer closer to the front and side walls.

•Check the type of feet that are being used. Try installing the ETC spikes.

•Decrease the level.

•Check your processor setup.

•If the problem persists, contact your dealer.

Hums or Unusual Sounds

•Turn the Dynamo 1000 off, unplug all signal inputs, turn the Dynamo 1000 back on and turn up the level. If the problem disappears, the hum is originating else- where in your system.

•Connect the Dynamo 1000’s AC connection to the same

AC circuit as the pre amp.

•If operating in wireless mode, move the subwoofer away from microwave ovens and/or any devices that use wireless technology.

•If the problem persists, contact your dealer.

Frequently Asked Questions & Troubleshooting

1000 specifications

The MartinLogan 1000 is a remarkable achievement in the realm of high-end audio speakers, showcasing the perfect blend of cutting-edge technology and exquisite craftsmanship. At the core of the 1000's design is the innovative electrostatic transducer that provides an unparalleled listening experience. This technology allows for a rapid response and a wide frequency range, capturing subtle nuances in music that other speakers may miss.

One of the standout features of the MartinLogan 1000 is its electrostatic panel, which uses a thin, flexible diaphragm placed between two electrically charged plates. This design ensures minimal distortion, resulting in sound reproduction that is more accurate and true to the original recording. The speaker's ability to create an expansive soundstage is another defining characteristic, allowing listeners to perceive depth and detail that is often lost in conventional dynamic speakers.

In addition to the electrostatic technology, the MartinLogan 1000 incorporates advanced imaging and dispersion techniques. The speakers are designed to deliver precise sound localization, allowing listeners to easily pinpoint individual instruments and vocals within a mix. This is particularly beneficial for audiophiles who seek an immersive listening experience akin to that of attending a live performance.

The cabinet of the MartinLogan 1000 is crafted with a strong emphasis on aesthetics and function. Constructed from high-quality materials, it boasts a sleek and modern appearance that fits seamlessly into any home environment. The use of premium wood veneers enhances its visual appeal while also contributing to the structural integrity of the speaker.

Connectivity is another strong suit of the MartinLogan 1000. The speaker is designed to integrate effortlessly with a variety of audio systems, featuring multiple input options to accommodate all types of setups. This versatility ensures that users can maximize their audio experience, whether they are listening to their favorite vinyl records or streaming high-resolution digital files.

Overall, the MartinLogan 1000 stands out as a premium choice for serious music enthusiasts. Its combination of electrostatic technology, precise imaging, and elegant design make it a top contender in the high-end speaker market. For those who demand exceptional audio fidelity and aesthetic beauty, the MartinLogan 1000 delivers, making it an investment worth considering for any serious home audio setup.