Toshiba PDP002Z manual Access to the VF-AS1/PS1 parameter, Response Value 0x0001 = Operation panel

E6581343 ③

3.6.Access to the VF-AS1/PS1 parameter

When access to the VF-AS1/PS1 parameter, set “1” to the PNU. The communication number of the inverter parameter is set to the subindex IND.

Refer to the inverter instruction manual about the communication number and unit.

3.6.1.Examples of reading or changing the VF-AS1/PS1 parameter

3.6.1.1. Example 1. Reading the basic parameter (cmod (command mode selection))

AK = 6 (Request parameter value (array))

SPM = 0

PNU = 1

IND = 0x0003 (cmod communication number)

PKE

0	1	1	0	0	0		0	0	0	0	0	0	0	0	0	1
	6						0				0				1
Requirement
PKW												PZD
PKE			IND			PWE
60	01		00	03			00	00	00		00	･･･	･･･

Response (Value: 0x0001 = Operation panel))

40 01 00 03 00 00 00 01

･･･ ･･･

3.6.1.2. Example 2. Reading the extended parameter (f219 (RX input point 2 frequency))

AK = 6 (Request parameter value (array))

SPM = 0

PNU = 1

IND = 0x0219 (f219 communication number)

PKE

0	1	1	0	0	0		0	0	0	0	0	0	0	0	0	1
	6						0				0				1
Requirement
PKW												PZD
PKE			IND			PWE
60	01		02	19			00	00	00		00	･･･	･･･

Response (Value: 0x1770 (= 6000 -> 60.00Hz*))

40 01 02 19 00 00 17 70

･･･ ･･･

*“0x1770” as reading value of “RX input point 2 frequency” is 0x1770 = 6000 (decimal number)

Since the unit of “RX input point 2 frequency” is 0.01Hz, set the following value. 6000×0.01 = 60.00Hz

- 17 -